Jump to content
Brian Enos's Forums... Maku mozo!

racegun9

Classifieds
  • Posts

    282
  • Joined

  • Last visited

Everything posted by racegun9

  1. Try it with a flat base pad (not a plus 1 or 2) If it works fine then, the side rib needs to come towards the bottom of the mag some more. Mag could have changed dimension just a bit over the years.
  2. Any problem using a fire hd8 kids or the newest hd8 kids pro on practiscore. They come with the heavy duty case and all fire models are on sale right now.
  3. That is almost always a bad combination of too thin of a follower along with a plus base pad and the rib on the magazine not coming to the bottom of the tube far enough
  4. This with the phone app works for me. In difficult outdoor lighting I take a large sharpie and paint the bullets black and seems to help.
  5. Mine dug in until I put the thigh pad option on. Be sure to get the thigh pad option and use it.
  6. I use the Federal Small Rifle 205 for 9mm major. The small pistol has a softer cup. Only way to know for sure is to load 10 or 20 up and go shoot them and inspect the primer hit. If the primer hit is pushed back out and smearing then not a good sign.
  7. Use the manage squadding tab. click on one of the reserved box's and start typing the name in. It will give you a drop down to select the name and click on it. If you already have them in that squad you will have to take them out of the squad to put them back in. Once you get your RO's in then you have to remove the reserved slots, if you want everyone to see the squadding. Otherwise you are the only one who will see the name in the reserved slots.
  8. You can add them under manage squading and you see the changes but no one else will until you edit the Schedules/Squad reserved #. Under the Manage Tab there is a Edit Schedules/Squad Bottom right on that page has a "show squads" click Then hit the pencil on the right to edit the reserved spots and save with the disc icon when your done. You have to pencil in to each squad to edit.
  9. I'd start with the VV N320 load Data for 38 Super OAL 1.240 115 HP-XTP Starting 5.1 gr. 1188FPS Max 5.5 gr. 1253FPS https://www.vihtavuori.com/reloading-data/handgun-reloading/?cartridge=42
  10. "Finally, it is considered that the inclusions of MnS axially aligned with the barrel along with the stress level, facilitated the nucleation and propagation of cracks consistent with the observed longitudinal frac- ture." Pretty much what I was thinking.
  11. Are you talking about Laz or Beven or both of them? lol I always get them from Shooters Connection
  12. Shooters Connection keeps replacement pin kits as well. There is a chart with some different length's depending on the base pad. They are $2.99 if you want to go that route. https://www.shootersconnectionstore.com/Taran-Tactical-Basepad-Replacement-Pin-Kit-P4657.aspx
  13. The aftec is pretty sensitive to the extractor tunnel being the right diameter as well. Best to use gauge pins and a reamer and make sure it's minimum .207 to around .210. Some slides are too small and need reamed out. Not sure what you would do if it's too big. I think there is a dimension from the firing pin hole to the inside of the extractor tunnel that has to be right when the slide is made also.
  14. What barrel twist does KKM use with the hybrid 9mm?
  15. Where are the rounds that do eject landing? Are they barely coming out and almost landing at your feet? Is there anything consistent with the pattern? What type scope and mount?
  16. Get a spare and have it ready to put on. They always seem to give trouble when you really need it. That goes for all brand of dots.
  17. Unless something has changed Schuemann barrels are not available anyway. Maybe somebody has one they bought and not using or a few weird barrels left in someone's stock. You would probably be better with a threaded barrel and comp set up anyway. Either hybrid, bull or cone. I would try to shoot some of the different types and see what you might like.
  18. If it's a smaller area you might try running a humidifier and see what happens.
  19. Sounds like you might be in real dry air and a static electricity problem. Check your humidity. Static electricity probably not a good thing in the reloading room. I've never had that problem with Silhouette but I also reload in the basement with some humidity in the air.
  20. Last I heard Schuemann is still not making any barrels. Out of business. KKM for a bull barrel or SVI for a bull barrel or blank hybrid. SVI is the closest to a Schuemann but they won't sell the AET and only the 5.4/5.5 inch version. You can get a blank hybrid/island barrel from them. They do use a 1-24 twist which should work very well. Takes about 90 days to get one from SVI so plan ahead. 3 or 4 ports seem to be shooter choice. Some like 8 or 10.
  21. Make sure you have some screws holding the scope mount directly and not just screws going thru the thumb rest and trying to sandwich everything together.
  22. For minor PF buy a few different type's of the cheap local ammunition close to you. Will probably be 115 or 124 FMJ and try it. Brass Blazer, white box Winchester, cheap federal would be good choice. Not sure if your gun is a 2011 style or something else. Some 2011's like a longer overall length but most will still feed factory 9mm. If you have a 38 super then you have very limited choices, and might need the Atlanta Arms stuff.
  23. I like the two sided mounts. They are very solid. Double Tap Sports has a new one that works with RTS2 or DPP. IPSC Alex or SV are the other two sided mounts out there. If you run a slide racker with the double sided mounts, it's best to have the detent set-up so you can remove the racker real easy to take the slide off.
  24. Is your frame drilled any certain way right now?
×
×
  • Create New...