Jump to content
Brian Enos's Forums... Maku mozo!

Lastcat

Classifieds
  • Posts

    434
  • Joined

  • Last visited

Posts posted by Lastcat

  1. 4 hours ago, zzt said:

    If the threads are not full and there is a little wobble of the comp on the threads, it may go on cocked.  Threads should be so full that some effort is required to screw on the comp and clock it.  Also, the heat of rapid firing may have loosened the Loctite and the comp wobble on the barrel.  That could cause strikes.

     

    Yep, I was just about to mention this too. If your comp was installed and was loose on the barrel to begin with, then what is keeping it aligned is the Loctite. If you are practicing and firing enough rounds to get the comp hot, it is possible for the comp to loosen and settle after it cools down. If this is your case, I would check the alignment of the comp to the barrel bore again. 

  2. On 5/17/2021 at 4:27 PM, motosapiens said:

    I know I never have until yesterday, but after going through everything in my mind, and reviewing my match video, it appears that I shot the inland empire section championship in virginia count. No make-ups on paper, and 1-1 on all steel. About 260 rounds. Of course I was shooting SS major, so often you don't really have much choice unless you are pretty sure you missed. Maybe I am over-aiming, lol....

     

    I was there too their Matchbook stated 262 rounds, that's including 8 for Chrono, but it seemed like they shot 3 and took 1, I dunno? I actually do makeup shots and finished with 280, about 18 over. Was freaking hot too the last 3 stages. 

  3. 3 hours ago, Terp said:

     

    There comes a point when they just throw in the towel and throw the cases by the road, rather than walk them down the driveway....making Santa's naughty list come Christmas-gift-card-in-the-mailbox time. 😇

     

     

    USPS.thumb.jpg.90571fe6826fb699c67a9055cfc85c3b.jpg

     

     

    Mailman d*ck move. Yep, they all know who the reloaders are on their route. They hate delivering boxes of bullets. So they dump them close as they can, or busted box missing bullets. 

     

    I've ordered 3500 a few times. I have a mailman that I have become friends with, nice gentleman. Will deliver everything, even brings the boxes to my doorstep and knocks on the door. When I ship boxes out, I leave a note in the mailbox, "Package to ship at the door please, thank you". I can see him pull up, so I run the box out to him. He appreciates that. This is just what I do, no you don't have to leave notes or run boxes out to the street. It's not for you to do. 

     

    Now every mailman is different, that are all not the same. Reading here and hearing of the horror stories of their 35# boxes of bullets being delivered reminds me of this one instance. 

     

    Ordered 3500 bullets from Xtreme 2 years ago. Regular mailman was on a 2 week vacation. Replacement dude left my bullets down the street in a neighbors mailbox. That neighbor marked the box, "Wrong address". I filed with USPS and called Xtreme. USPS kept sending daily reports via email, "they are looking". Regular mailman comes back from vacation, finds my box down the street and delivers. Nice guy too. 

     

    USPS keeps sending emails thereafter, that they are still looking for my box, for 45 days. Now I order 1k at a time every 45 days. Mailman d*ck move? Yep. Fedex, UPS maybe?

  4. 2 hours ago, MikeBurgess said:

    I hate the term Slow Down, a lot of the time when shooters say that what they do is shoot slower at the same accuracy they normally do. 

     

    I would hate that too. Someone that is shooting with accuracy is asked to "slow down"? I'd be asking that person who said that to please extrapolate. 

  5. 9 hours ago, ima45dv8 said:

    Some very good advice I once got was to shoot slow and do everything else fast. Make sure you take enough time with the shooting part.

     

    This.

     

    Just 4 season in as a Senior Open B. This is my experience and what I have learned. (You mileage my vary). I'll go into a few things I found about shooting competition for myself. When I first started in 2016, every stage that day I taped a video. I watched this video last year and just couldn't watch it and laughed the whole time. I was very slow and sloppy.  

     

    Finally got out of a D and into a C in 2017. Then into a B in 2019. During this B period I found that I could have a few really good stages, landing in the top 10 overall. Then the other 3-4 stage in the 30-40's. It has been like that for a year. (Ok, I'll iterate, I compare myself to all shooters and also to all Open Div. Shooters, that's me. YMMV).

     

    Last year I figured out what was happening. The 3-4 good stages I was doing good at, I had the hits, transitions and the right stage planning. I got spoiled. I understood how to get my hits and movement from the previous good Stages. So I pushed faster and tried to duplicate that same tempo, but would get Mikes, resulting in bad stages. I was just not ready yet. The performance idea was there, I just wasn't and got ahead of myself.

     

    So in 2020 I went to a Match with the idea I would slow down and get all Alphas. I did 80% and landed in the top 15. Was very hard to do, slowing down and aiming for Alphas every Stage, but it paid off. I was moving good, but when it came to a target I would slow down and make sure I got A's, if I could see a miss, C or a D, I'd send an extra shot. Slowing down when it comes to pulling the trigger got me better overall and in my Open Div. It worked, took a lot of discipline to focus on hits, but it worked. 2021 I am doing same, get my hits/points. When I get to an A it will happen when it happens. Go fast and slow down for hits. 

     

    Eventually I hope to be consistent in each Match, but it is going to take some time and effort on my part. Slow down at targets, move in and out of transitions fast as possible, be accurate and get your hits at your speed. Stay in your lane. 

  6. 3 minutes ago, ChuckS said:

    No problem. 2 things I always do when walking the stage is look behind big poppers for little poppers and make sure I know which are forward falling and which are rearward falling. 

     

    Yep, me too. I actually will walk behind the barrels/walls all the way to the back and look to see hidden targets. Then, look at each target for un-taped holes, steel not painted, swingers and plates not set correctly. You guys have been there too, last squad didn't tape. Might have thought they were done and no other squad is following or they just high tailed out of there.

     

    Sometimes I can get on the best squads, everyone is taping, then there are the other days 😡, "We need tapers!".

  7. 27 minutes ago, ChuckS said:

    Practiscore has all steel set as hit for scoring. If there is a miss (standing plate/popper in your example) the RO would just tap the M button to add one mike. The steel "A"s would decrement accordingly. If the RO is sure that the plate was not shot at, he would also add a procedural. BTW: The penalty for a miss on steel is 2x the scoring value or -10 (rule 9.4.4.) Not shooting a steel is -20 points in penalties and the 5 that you left on the table. Not the best strategy for a stage win. 😉 

    image.png.02652982ad56dbaaa993db05cbd04938.png

     

    Thanks ChuckS. Don't recall seeing that Practiscore Format for M/NS on our Pads at our Ranges. Will have a closer look next weekend.

     

    Of the 4 Ranges I attend, it seems their Pads can have different formats, even though we find a way to make it work. And, like this China Virus bs, take the pad, leave the timer, take it all, leave the pad, no take the bucket and everything, take the bucket and leave the pad, no just leave everything 🤪. You guys been there yet? We have. 

     

    Yes, -10 (double the highest value for a Target). Then the -10 for FTSA, ouch 😬. It's always that little tiny popper behind those double stacked barrels @ 25yds and you are the first shooter 🥴.

  8. 7 minutes ago, broadside72 said:

    FTSA only applies when the shooter Fails To Shoot At a target. If they miss the steel plate/poppper and move on, its just a miss. No different than a cardboard target. 

     

    Right, but on the score pad, one can enter 1 less steel in a certain area of the score pad. But do you also mark it as a Mike? If so where? Or does entering 1 less steel also apply the Mike? Then it would be -5 for the steel and -10 for the Mike. If that is the case.

  9. This isn't an RO Test question.

     

    We had a question whether a Popper, Plate or Steel was left standing at the end of COF and would that be a FTSA? On the Scoring Tablet, it is usually just minus 1 steel (-5 points). Been searching the Rules but have not been able to find the ruling for steel and leaving a Popper, Steel or even a Plate on a plate rack. I'm new to the sport and shot a few Matches. I have seen steel standing and don't recall a FTSA Proc. during my 3 yrs in the game. 

     

    I found that 10.2.7 could apply, except as long as they shot at the steel at least once and it is still standing. Then if it is left standing it would be a -5 penalty and not a FTSA. Since the steel is a scoring target and the competitor left said plate/steel standing without engaging, then this would be an FTSA? Maybe I just answered my own question. 😜 Clarification would be helpful. 

     

    Is there a ruling for failure to engage a popper/steel/plate? Comments?

  10. 34 minutes ago, blueeyedme said:

    Same boat.  Have checked pretty much everyday for the last few months.  Have never seen anything in stock....  Oh well.  I have enough to get me through my planned matches, but not enough to practice with live rounds.

     

    I hear ya. I have enough until Oct (about 5k rounds) and then nadda. I really want to get out and practice too, which I have. But every time I do practice, it's like I'm out a Match of ammo. 

  11. 1 hour ago, Furrly said:

    Lastcat-I'll give you the secret time for a case of primers😂😂😂

     

    Deal, 1 case of Nigerian primers are yours 🤣

     

    I sure hope things get better by Aug. We had Primers at our local Sportsman Warehouse. They posted on their Facebook page, they were gone before I could drive 15 mins to get there, geesh! 🤨

  12. 2 hours ago, kamber said:

    The window of opportunity a few months ago was only 3 to 8 minutes or so during the week that I managed to get orders placed, makes sense that it's a much much more competitive race to checkout nowadays.

     

    No kidding. Been checking MG's Website for 4 weeks, daily. Sometimes every 15 mins, sometimes every hour, up to 1am. Not seen anything yet. But, I'm going to persist. 🤨

  13. Start with the Barn at 20 yards, then a dumpster and finally a mailbox. 😀

     

    Welcome and all kidding aside, it's just practice. I started in USPSA in 2016 and still working to get better every year. I found it really takes time to lose the flinch and keep your hands steady. Finally can say I'm there after maybe 20k rounds. Not saying you need to shoot 20k rounds, but it will come when you get the work in, it's all it is.

     

    Most of the good shooters in this sport have shot many rounds and many Matches. They've worked out all the bugs. Good gun, ammo, sight (Iron or Dot), grip, mags, etc.... They've all put in the work. If you are having problems long distance 20-25 yards, start 10yds and work out to 20-25. Exam what you are shooting and what ammo. Try to hit a 2" circle at 10 yards.

     

    Practice, keep your hands steady and don't flinch. Good luck. 

×
×
  • Create New...