-
Posts
7,193 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by eerw
-
-
Give you an idea.
CZ 16, CZ( MecGar AFC) 17, CZ 18 ( SP01) magazines
the tubes are different length and widths ( slightly)
different lock plates with position of retaining nub
and different springs and followers ( mecgar-blue)
tube length. so be aware of basepads to meet the OAL for Carry Optics mags
Difference in position of nub on lock plate
-
At this point there is not really a cost effective way to do it. A couple of folks have tried lasering checkering , with some success.
-
S2 with SRO
in CZ
20 hours ago, mveto said:I just got my SRO’s today and am just waiting on the RDS plate from CZC to come back in stock, hopefully the plates will be back in stock soon.
about a week.
-
AO1 LD Review
in CZ
On 8/21/2019 at 2:40 AM, Jason Krywicki said:
Stuart, do you know if vz is going to do a diamondback version of grips for the A01 series ?
Sent from my iPad using Tapatalk ProI don’t.
VZ and LOK both have the pattern for the A01
-
I find the balance of the SD to be a bit more to my liking.
the balance is more in my hands than the sensation of hanging out at the end of the gun
I dont have a lot of rounds through them. but do handle and dryfire one almost every day. also pick up the LD quite frequently and have shot one of those quite a bit.
The SD does have the fat Ghost Competition hammer installed. extended firing pin and lighter springs.
The SD is available direct from CZ Custom.
-
AO1 LD Review
in CZ
Nice . Looks like milled for the factory optic plate
-
AO1 LD Review
in CZ
We have grips in production with thicker insert into the grip for better stability of standard magazines.
-
AO1 LD Review
in CZ
Angus's A01 LD and A01 SD. set up with mag catches and Ghost Competitiion hammers.
-
AO1 LD Review
in CZ
1 hour ago, Hooked said:CZ 75 mags run flawlessly in the A01-LD.
We found some mags will work.
There are grips in design to work with the smaller dimension magazines.
-
-
Just saw a post on IG where someone had built up a safety lever for an omega.
see if I can find the shop that did it.
-
nice work.
-
AO1 LD Review
in CZ
9 minutes ago, Almo said:Has anyone checked to see if the A01 with the base pads on the mags fits in the Production box?
it fits the USPSA box pretty easily
-
Should be good
-
blue. good bit and screwdriver will get it out.
-
Building up my CM and running an 8# recoil from Wolff. The full length spring.
gun is running well in tests so far.
-
11 hours ago, CHA-LEE said:
I had local Colorado gunsmith Steve Pitt do the slide lightening. I let him do whatever he wanted with the weight reduction. I told him "I need 1.5oz removed from the slide and don't care what it looks like after its done". He worked his magic and what you see is how it ended up.
Looks good!
-
2 hours ago, FTP_Shooting_Sports said:
Stuart,
I will email you the drawing.Thank you
-
I've only shot the 150 and 130 PCC offerings.
both shoot well, but really liked the 130 in my 75 Bull Shadow pistol.
-
Do you have any spec drawings or a dummy sight we could get hold of?
stuart@czcustom.com
-
5 minutes ago, Texas45 said:
So is the Shadow 2 Bull Shadow on the Production or CO list?
No. Only the 75 Bull Shadow.
-
Slide is aluminum. Would worry that the dovetail would stretch out. Might need to run screws through the mount and into the slide. Might hold it a little longer before breaking
-
12 minutes ago, Woodsk said:
I am just getting into CZs I heard the AO1 was production legal, but did not find it on the list.
Is it approved?
IPSC Production and Production Optics Legal. as well as 75 Bull Shadow and A01 SD
-
1 hour ago, jripper said:
So I've got one now. Not fired it yet. The single action is extremely crisp, pretty much no hammer camming on break. The double is smooth, with the exception of a small hitch about 3/4 of the way back. I've run into this before, and I think I can fix it, but I'm a little anxious about disassembly, as I understand the sear cage is pinned direct to the frame. Anyone had one apart yet? I ordered a 11 lb hammer and extended firing pin from Cajun, and going to install that to see how it feels. Will shoot soon. It's very well made, that's for sure!
Just bustin on you , why wouldnt you buy the spring and firing pin from CZC
P10F Optic Ready in CO?
in CZ
Posted
Yes they are 140.
the 10522 can be fitted to the P10 tube