Cuz
-
Posts
2,260 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Cuz
-
-
Just wondering how many Mfgs make an MOS plate for a Trijicon SRO?
Im looking for alternatives to the C&H plate.
Forward Controls Design makes one.
Anyone else?
Thanks. -
1 hour ago, PatJones said:
If I answer a question at BEnos and the OP isn't there to hear it, does it still make a noise?
Absolutely!
I learn a lot from reading the many responses to questions other people ask. It’s the ops loss if he/she doesn’t follow up after asking a question.
There will still be a lot of others that will learn from the answers provided.
-
-
4 hours ago, vluc said:
Correct screws, torqued down correctly? Not a flame, just asking. I have as many through my 34.4 with no issues, I've had more with another mfg plate on my backup gun than I have had with the MOS.
Yes, went over that in detail with Glock support. The tech said I could consider getting better quality screws then the ones provided by Glock. He said they were rated at around 100,000 psi tensile strength and should be fine under most circumstances, but he said McMaster sold some that were rated at 140,000 psi. I tried to look them up, I wasn’t sure I found the right ones, and did want to pay $7 each for them.
then, I found them for $2 at Big Tex Ordnance. I never heard of them before, but took a chance since it was just a few bucks.
-
I like the folding stock on mine for easier portability and storage in the safe. I don’t shoot it much and am not experienced enough with precision rifle shooting to know if it helps or hurts my ability.
I would not have bought it if it didn’t have the folding stock option.
-
27 minutes ago, SGT_Schultz said:
I have over twice that many rounds on my P-10F OR, still going strong.
Your failure reinforces my opinion of MOS as not good to go.
Lol, I have one Gen4 G17 MOS with a Holosun sight that has never failed me. Probably because I never shoot it. That's one way to make them last forever.
-
Argh! Sheared the plate of my slide today. Probably only has around 6-7k rounds through it.
I think if I could find a Gen5 slide milled for RMR in stock I'd buy it.
At least my backup is a Gen3 with Brownells milled slide. The dot isn't going anywhere on that one...
-
Interesting video, thanks for sharing.
-
Sorry to hear you all are having such problems. I went the RL1100 route, and don’t regret it, but that doesn’t mean it was trouble free.
Maybe we are all of the wrong frame of mind to think that after spending so much for the press it should work flawlessly.
Does anyone on this forum know anybody that bought a Mark 7, or RL1050/1100 and took it out of the box and had it run perfectly?
It seems we all go through the “dialing in” or troubleshooting period where we tweak, adjust, or even replace/upgrade some parts before the press is up and running. And even then, when it’s working, as soon as someone mentions a new doohickey we immediately start considering whether or not to add it to our press.
Mine is finally running fine (manually), but I seem to want to replace my shell plate with an aftermarket and I don’t even know why. It never ends.
Hopefully, you guys will get things worked out and Lyman/Mark 7 support will be responsive and helpful. I’m watching this thread because I’m sure there will be a Mark 7 press in my future, just not sure when.
-
It’s been a while since Tapatalk went away, and that’s not really an issue. What is an inconvenience is that the current forum software doesn’t seem very friendly to use on mobile devices.
is it possible to consider an alternative? Another forum I frequent seems to work really well on mobile devices. Could we possibly see what they use and consider a switch? I’d be happy to donate to help make it happen. Here is the site if others want to verify whether it works for them on their mobile devices before a switch may be considered:
-
It’s the same for me using Firefox on an iPhone.
I miss Tapatalk.
-
Definitely plated, not even a legitimate discussion. No reason to choose coated over plated other than cost or availability.
-
16 hours ago, RudyVey said:
at least they sell you 5 K and charge the hazmat fee, not like all the others that sell only 1K and get the fee five times if you would buy 5 k from them (5x1k).
I didn’t think they got the fee, I always thought it went to the shipper, FedEx or UPS.
-
I think the good news takeaway is that they are finally showing up. Yeah the are expensive, but I think they will soon come down a bit. I wouldn’t be surprised if the new normal has them running about $60/1,000 for the next year or 2.
-
Small pistol primers are currently in stock at Natchez.
-
10 hours ago, ltdmstr said:
Friend of mine was in a store in MO about 6 months ago and they had a whole table full of Federal SPP priced at $60/k with no limit. Not exactly cheap, but that's the best price I've seen in a long time.
Damn, I’d probably drive up to 10 hrs to get that price if they had as much as I wanted…
-
Did they say why they changed their profile? There must be a reason.
-
7 hours ago, bigtimelarry said:
Why get a slide milled when you can get the MOS ? What, you think the Dot sitting 1/4" inch lower is gonna make a difference.. LOL..
Not at all, but it’s a much more solid mount to attach the sight directly to the slide instead of having a plate mounted to the slide, and then the sight mounted to the plate.
2 more screws to break, everything is thinner with less screw threads holding them in place. -
9 hours ago, MWP said:
I remember seeing those and never knew how that would work out.
Is it adjustable at all like a fixed auto sight is?
I dug out the package, It’s made by SDM Fabricating. It’s called “semi-adjustable” but I don’t know about that, maybe if you didn’t screw it down all the way you can get some height elevation. I loved it when I shot a lot of revo, but I am probably going to replace it with an Allchin sro mount.
-
Lol, good one Sarge.
Current pricing for CCI SPP from Natchez is $491 for 5,000 delivered. Hopefully, the next time I buy primers they will be at least a bit more reasonable… -
I actually put a fixed rear sight on mine. I forget who makes it but I’m pretty sure it came from Brownells over 10 years ago. It works awesome.
-
4 hours ago, Brooke said:
Its a 1/4 inch e-clip Available at Lowes or Home Depot cheap You will need them often so buy a few. Get some e-clip pliers too. Cheap and make the replacement easy
Thanks. Do you really need them often? This is the first one I’ve broken in 25 years.
-
8 hours ago, Bagellord said:
What Sarge said is the simplest way to remember it. I just want to add: if you forget your barney mag (the one with 11) in your back pocket or elsewhere, that's a bump to open. Even if you never use that mag during the course of fire.
Been there, done that. But only because I self reported. I had accidentally grabbed the 2nd to last mag on my belt at make ready instead of the last mag which I normally keep 11 rounds in. Imagine my surprise when the slide locked back at shot #10. At least I got to load my mags to full capacity for the last 2 stages…
-
Did Blue say why they changed their profile? Seems like that’s a big decision to make, there must be a reason. And, if your having issues, then you would think a lot of others using the Dillon seating die would also start having similar problems.
Who makes replacement MOS plates?
in Glock
Posted
Thanks, I found the FCD plate in stock at Primary Arms and ordered it. I should have it ready to go by the time I get the slide back from Glock.