Jump to content
Brian Enos's Forums... Maku mozo!

xtremekramer

Classified
  • Posts

    92
  • Joined

  • Last visited

Everything posted by xtremekramer

  1. Thanks! Mine is definitely a gen 1 then. Sent from my iPhone using Tapatalk
  2. Been off the forum for a little while now. Was browsing and found this post. Forced me to go do a little research. Can any one tell me when the 1301 comp gen 2 came out? I haven’t had any luck google searching it. Pretty sure I own a first gen. What changes did they make with gen 2? Sent from my iPhone using Tapatalk
  3. And here I was hoping your slop was from the two piece....still worth buying or not worth the money? Sent from my iPhone using Tapatalk
  4. Yeah, I don’t shoot open so I can’t help you with the mount! However, I see you mentioned the newer 1301s have a different action length? Sent from my iPhone using Tapatalk
  5. So did you get the single piece stainless one or the two piece stainless/aluminum one? Sent from my iPhone using Tapatalk
  6. A quick google search brought up this one http://www.briley.com/p-56896-briley-bolt-operating-handle-12-gauge-fits-a400-xplor-excel-xtreme-unico-1301-xtrema-1-xtrema-2-tx4-ambidextrous.aspx Sent from my iPhone using Tapatalk
  7. You must have big thumbs. My small hands got stuck a few times. Luckily it was right after I got it and wasn't trying to go fast yet. I had my lifter welded the first week I had it. Sent from my iPhone using Tapatalk
  8. There are some longer chokes that I have seen out there, but I didn't care enough that the tube was longer than the barrel. Real reason I went with extend choke tube was so I wouldn't have to use a wrench to change them out. I just go hand tight and check it before I shoot. Never have had t come loose. Sent from my iPhone using Tapatalk
  9. This is my 24", +5 Nordic with extended beretta IM choke Sent from my iPhone using Tapatalk
  10. How did your loading port come out? I actually have touched mine yet! That is my next mod, but being my first shotgun I am really not sure what angles I will want on it! So I have been shooting it stock! Sent from my iPad using Tapatalk
  11. I took a file to mine in the stock. Didn't take much to get mine to work. Sent from my iPhone using Tapatalk
  12. You will need the clamp to use a sling. I only put the clamp on mine when I need to sling it. I have tried quite a few different rounds in mine. I will have to go back and check my list to see about the white box. Don't think that is one I have tried yet. I have been keeping the box ends to track what I have put in it. Sent from my iPhone using Tapatalk
  13. Most of the guys on here run no clamp. I have one, but the only time I run it when I need to sling the shot gun. Mine eats anything I have put through it. I haven't had a jam yet. Mine has not auto fed low recoil hand loads the skeet guys let me try at the local range. Lately I have been feeding it Wally World federal since its cheep and feeds just fine with mine. I haven't played enough with slugs to figure out my point of aim issue. Mine is also high by about 8 inches. Sent from my iPhone using Tapatalk
  14. Picked up a Nordic low drag follower today at a local gun store. Had been looking at upgrading my 1301 with one to help recognize when the tube is empty and to further experiment with small performance upgrades. I will be curious to see if Iam able to notice a difference or not. Either way I like the red! Sent from my iPhone using Tapatalk
  15. Your welcome! Sent from my iPad using Tapatalk
  16. Mine does not have any angle to it. BCL-12 is what they told me to order when I asked. Sent from my iPhone using Tapatalk
  17. I went with a +5 and didn't buy the clamp originally. Ended up buying one later just so I could use a sling (so far only used it for duck hunting!). It is not typically on my gun though. It's not needed. Maybe one of the guys using a +6 or longer will chime in if a clamp is actually needed for the longer lengths. If you have big hands you won't need to weld the lifter. I had mine welded up due to small hands. Shoot it for a while then decide if and how you will open the loading port. I haven't done mine yet. I eventually will. Sent from my iPhone using Tapatalk
  18. The post you are looking for is 1136 for 3 gun chokes. Linked article from Pat is there. Really depends on your clubs typical ranges. The Pat link walks you through it pretty well. So far I have stuck mostly to an IC. Sent from my iPhone using Tapatalk
  19. You can go as long as you want to. Sent from my iPhone using Tapatalk
  20. Most of us are running no clamp. I bought one and only use it when I know I need a sling. Sent from my iPhone using Tapatalk
  21. Interesting! You will have to let us know if you have any issues with it as you use it. Sent from my iPad using Tapatalk
  22. I took plastic off the stock until it was below the female piece on mine. It now works as it should. I used a file and tried to not hit the metal female end. I could tell after playing with it for a bit that the male end wasn't recessed far enough to engage the balls. I had to take a little more plastic off then I expected I would have to. Sent from my iPhone using Tapatalk
  23. Dang dude, you did steal it! Sent from my iPhone using Tapatalk
  24. I ended up picking up betetta chokes for mine when they had a cyber Monday deal at 40% off. Sent from my iPhone using Tapatalk
  25. Start by looking at post 1136 of this thread. There is a good article on 3 gun chokes linked there. As far as the 3/4 vs 2 inch...from what I have read up on (I had the same question) it is the shape (length of the taper). The longer the choke, the more gradual the taper. This lessons the shock (sudden compression of the shot) the shot undergoes as it hits the taper in the choke. Suppose to make for a more even pattern is the theory. If any one would like to chime in, I wouldn't mind hearing another take on the topic myself! The skeet/trap/sporting clay guys I have talked to seem to like the 2 inch chokes for their really fancy guns... I bought 2" modified (shoots like a full with steel shot) to use when I try my hand at duck hunting. Yet to be seen if I will ever need it for 3 gun. Sent from my iPhone using Tapatalk
×
×
  • Create New...