b18prl
-
Posts
214 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Everything posted by b18prl
-
That sounds kinda like it.
-
I shot 200 yesterday and it had 2 jams with random mags.
-
Ohhh and I load with 650 using my fingers to slow down the shell plate so no spillage there.
-
I detail strip it after every 2-3k rounds.
-
It happens with both WST and N320, let see..... I bought the gun new in Summer of 2013 so my guess is around 10-12000 rounds through it. I always loaded the same with 147 Bayou with 3.5 gr if WST for practice and 3.3 gr of N320 for major matches.
-
Anybody has had a problem with the extractor before?
-
Bayou 147gr with 8lbs spring and it happens with random mags. I chamber checked.
-
I kept getting this jam recently but only happened while I'm shooting a match so I had no time to diagnose it. Today it happened again first time on my practice. Anyone ever had this jam before on Stock2?
-
XL650-hard to pull up on handle
b18prl replied to Scratchthejeepguy's topic in Dillon Precision Reloading Equipment
Give Hunter at Starline brass a call he has a fix for this problem. -
I tried 4.0 of WST with 200 gr Bayou loaded long at 1.215" and made 169xxx also tried N320 at 4.0 gr but didn't make PF also 4.5gr of WSF it too didn't make PF. So I'm gonna stick with WST.
-
Just tested out 200 Bayou with 4.0 of WST loaded long at 1.215" out of Trojan and it made 169xxx here on a 90+ degree in Florida, I also brought some that I loaded with N320 and WSF so far I like WST the best.
-
My stock2 did that too when I first got it last Summer. What I found was the barrel hood is hanging up on the lug! It did go away after a few hundred rounds though. Hope this helps, Pat
-
I have one of CGW sitting around and trying to figure out how to make it work in my s2, thanks for sharing.
-
My Lava grips came in and man! they're flimsy….lol Need to cut the bottom part off some to fit so far I like the thickness of it. Will give Tilander a try next.
-
thinking about wrapping those grips with grip tape.
-
Are they much thinner than the stock walnut grips?
-
Try polish the bottom of the sear.
-
I guess I'll skate taping it.
-
just posted this on another thread http://shop.coppergu….m1plqscsfapp03 wanna know if it'll fit stock2
-
Thinking about give these a try:http://shop.coppergungrips.com/EAA-Witness-Grips-Lava-Rock-Texture-WitnessL.htm;jsessionid=638D93DBAD77B3AC655A732F8C49D054.m1plqscsfapp03 but not sure if it'll fit stock2
-
What's wrong with stock grips?
-
I run 3.7 and make 131xxx with it, I tried 1.095" too but like you said some don't go all the way in. I crimped them at .378"
-
I ordered my sears from EAA Corp or Jim Bodkin in Texas.
-
I also use Bayou 135gr with 231 but have to load them at 1.085"
-
Just order a one piece sear off of a S/A gun and file the safety leg on the sear to fit.
