[Any tips on how to get the front sight off that has a stripped screw?]

The plastic front or the aftermarket front

It's an aftermarket front sight. The screw is either aluminum or soft steel.

[Any tips on how to get the front sight off that has a stripped screw?]

Is the hexagon striped or the thread striped? Do you have a proper front sight removal tool? I would put a small torch on it to soften the metal

The hex is stripped. I would like to take it off and find a replacement for it as well.

[Any tips on how to get the front sight off that has a stripped screw?]

Exactly what the title says. The screw is stripped and I can't figure it out. Any tips?

Thanks.

[Question about swaging 9mm WCC military brass ...........]

Can someone post a few pictures comparing the primer pocket hole of a perfectly swaged pocket vs a non swaged or improperly swaged pocket? I hope I've been doing my .223 brass right.

[G-Code holsters and RTI system]

I have a bunch of G-Code gear. Their holsters and mag pouches are great.

They are made from thick kydex and have a good range of retention adjustment.

I like the RTI system. It lets me easily move holsters between my different belt setups and their paddle mount.

You can find some great deals on accessories and mag pouches here. Most of the popular holsters are gone now.http://www.natchezss.com/brand.cfm?brand=EY&outOfStock=0&orderBy=&startRow=1

Thank you for the reply. Are you running the OSH system for your handgun?

[G-Code holsters and RTI system]

Hello,

I wanted to get some info for a pistol holster for a g17 and I came across G-code. Has anyone had any experience with them? Could anyone give their opinion on the g-code holsters versus bladetech for USPSA, 3-gun, etc? Are there any other recommendations?

Also, has anyone had experience with their RTI accessories?

http://www.tacticalholsters.com/mm5/merchant.mvc

Thanks,

Dan

[Home made Primer Pick up tubes]

Nice! How much are one of those cutters?

[Get your Powdersorders in!]

good score on the tac... looks like they are all out.

[How reliable are Low Mass BCGs]

Adjusted the syrac gas block accordingly and left the rifle alone after that and the LMOS has not had a hiccup yet.

[JP LRP-07 opinions / reviews wanted]

So I'm curious what you folks use to clean your LRP07s? Is there one go to bore guide or kit for this semi-auto platform? I was looking at the JP one but 45$ seems steep. Let me know what you folks use.

cheapaskate GI! you live in Calaprunia, which ain't cheap; ;you shoot a JP which ain't cheap! why you go cheap now? JP knows what they are doing. go with their product; they must have a reason for building the one they sell.

Fair enough. I'll use the opticsplanet discount to get it.

[JP LRP-07 opinions / reviews wanted]

So I'm curious what you folks use to clean your LRP07s? Is there one go to bore guide or kit for this semi-auto platform? I was looking at the JP one but 45$ seems steep. Let me know what you folks use.

[Competition gear questions]

G35 is what I went with, so that I can shoot limited major for uspsa. I've got a conversion barrel on the way so I can shoot 9mm for steel/3 gun. Basically it's like having two guns for the price of one.

Another option is to load some .40 minor loads. Tuned right with the right Minor PF loads, a .40 can shoot softer than a 9mm IMO. 9mm ammo is cheaper though

Would you recommend starting with a 165gr to make a soft shooting .40 load?

[HAND GUARD TO FIT SYRAK Gas Block]

My troy alpha works fine.

[Competition gear questions]

Not to throw this thread off topic but do most people use a different holster for their 34 in IDPA and USPSA? I have a bladetech for IDPA right now but I was just seeing if there was anything else out there worth looking at.

[glock 34 sights]

I have a .245 warren sight on mine and I'm impacting low. I think I need to get a .225 or .235 if I'm 2'' low at around 25 feet.

IIRC, the 245 is supposed to work best with the 34/35. 215 for the others, however, I run a 215 on my 34 and it's just fine. Probably just compensated for any differences over time. Wasn't until well after I had been using them that I found the 245 was for the 34/35. Can't remember what site I saw that on, maybe CPWSA.

Are you POI/POA with the .215? I pretty much have to line up the rear notch to the bottom of the red bead of the front sight to hit on impact.

[glock 34 sights]

I have a .245 warren sight on mine and I'm impacting low. I think I need to get a .225 or .235 if I'm 2'' low at around 25 feet.

[Where to get twist knob for powder bar]

http://img.photobucket.com/albums/v726/Coloradoglocker/PowderMeasureKnob.jpg

Use a 2" hole saw and drill plugs in a 1/4" thick hardwood. Drop 1/2" hex head bolt in center hole and mark head shape. Take an Exact o knife and cut out shape for press on fit. Paint knob, file notch in top edge, mark notch with white crayon, and press on to powder measure adjustment bolt. Print labels on self stick blank and apply.

[Glock 34 vs. Glock 17]

I bought my 34 first then I found a 17 for a good price. Both are great guns. You just have to decide what you want to do with them.

[New G17 thinking of making it a limited gun]

It looks great. I've been thinking about a grip reduction and getting some work done to the trigger guard.

[Dillon Lubrication]

What do you folks think about all purpose lithium grease on the 550b joints?

[Looking for a soft two-gun case for 47" shotgun + AR]

+3 For the Voodoo.

[Seekins iRMT-3 Upper]

So do you believe that the barrel is not an accurate barrel and it was a receiver problem? I have a nordic barrelwith a vltor receiver and I have been very satisfied with it.

I'd say the first receiver I had it in was not accurate with that barrel. The barrel itself is capable of really nice accuracy as shown after mounting it in a Seekins. I've heard other people have had really good luck with the first receiver I tried which is why I don't want to body bag them. Might be the lousy gunsmith (me) who put it together. Or just tolerances that did not work well with the two in combination. Whatever it was, I'm really happy with the combination now. I'm already looking for just the right barrel to put in the other Seekins receiver I have.

I've been hearing a lot of good praise about these Seekin receivers. I might have to give one a shot. Are the iRMT-3 only compatible with their handguards?

[Seekins iRMT-3 Upper]

So do you believe that the barrel is not an accurate barrel and it was a receiver problem? I have a nordic barrelwith a vltor receiver and I have been very satisfied with it.

[Anyone know of a Brass trimming service?]

Get your self a Little Crow WFT i hooked mine up to a 3/4 HP electric motor and man is it sweet. It works well on a drill too.

May I ask what brand is the little 3/4hp motor you are running for the WFT? You have a link to it?

Thanks.

[AR Gold Trigger]

Has anyone compared the AR Gold to the Geiselle Hi-speed triggers? They seem to be in the same price range but I'm not easily accesible to either to try them out.