-
Posts
358 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by dvc4you
-
-
Do MBX magazines work with SVI signature grips? SVI frames?
Sent from my iPhone using Tapatalk Pro -
Clays
Sent from my iPhone using Tapatalk Pro -
I've been using WSR primers for many years and have had zero problems.
+1
Sent from my iPhone using Tapatalk Pro -
I have an Infinity Limited gun I bought in 1998. It has a Shuemann 40 S&W barrel and probably 110,000 rounds through it. I have never cleaned the barrel, I clean the chamber and that’s it. All bullets were FMJ or plated.
The barrel is mirror clean and groups very well. I see no purpose for bore snakes or guide rods....or solvent.
The chamber gets clean with Acetone and a copper brush.
Sent from my iPhone using Tapatalk Pro -
Every time, I buy a house I look for an extra bedroom for my reloading ...just like having another kid
Sent from my iPhone using Tapatalk Pro
-
Per Shuemann’s instructions the only thing that goes through my pistol barrels is bullets.
Sent from my iPhone using Tapatalk Pro
-
1.235
Sent from my iPhone using Tapatalk Pro
-
I had good experiences with Zelle....
Sent from my iPhone using Tapatalk Pro -
I found that despite being cross dominant, with a red dot I don't have any focusing issues. In fact, I do not shoot a dot gun as cross-dominant. I am right handed and I can index with my right eye while using my open gun. This is not what I expected, but this is what my mind feels comfortable with. What I have also found is that I can also shoot a dot gun as cross dominant, too. This has come in handy for weak handed shooting. I don't know yet if it is a competitive advantage, but it can't hurt.”
I works that way for me too.
Sent from my iPhone using Tapatalk Pro -
Do, it. I was in the same boat for years. I wish I had made the switch sooner.
Sent from my iPhone using Tapatalk Pro -
Shot this one last match, love it, even if only got a A run....
Sent from my iPhone using Tapatalk Pro -
For the record, it is “Guga Ribas”
Sent from my iPhone using Tapatalk Pro -
Just a suggestion. I load ammo with 3n38 very long. No issues with ammo growing. If you're chamber has enough freebore, that might be another option to consider.
How long, do you mind sharing your recipe?
I will be shooting a 5 inch Infinity Hybrid barrel with (probably, to be determined) 2 holes and a Cheely Titanium 4 ports compensator.
Sent from my iPhone using Tapatalk Pro
-
Sooo I am switching to 9 Major, I will be using MG 121 JHP and 3N38 because I am a hoarder and have a lot of it. I know is a pita to load 9.5gr of 3N38 in a 9 mm case and is a compressed load (don’t care) . Question: do I need to use an undersize die in station 1 of my RL1050 to avoid the rounds from “growing “ over time? I am using the zip tie hack and the rotating locator buttons to eliminate powder spillage.
Sent from my iPhone using Tapatalk Pro
-
Cross dominant eye, trying the scotch tape on my shooting glasses and never working well enough.
Sent from my iPhone using Tapatalk Pro -
Here in NC, I can shoot a match every weekend if I wanted, but I have found that matches don’t replace practice so 2 matches a month and 2 practice sessions a month for me.
Sent from my iPhone using Tapatalk Pro -
Good for table starts
I wouldn’t shoot open without it.
+1
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk Pro -
Sell those overpriced 1911, buy a nice used 2011, keep the rest of the money in the SVI fund. 20,000 rounds later you will now what you want. Order SVI keep the old gun as a backup.
Sent from my iPhone using Tapatalk Pro -
Insert longer screws in a piece of plywood to the length required and grind/file them down.
Sent from my iPhone using Tapatalk Pro -
Try 9# and 8# recoil spring and see how the dot behaves, I would not pay any attention as to how far the brass lands...
Sent from my iPhone using Tapatalk Pro -
Very happy with my Guga Ribas
Sent from my iPhone using Tapatalk Pro -
Thanks everyone
Sent from my iPhone using Tapatalk Pro -
Mounting an RTS2 to a Cheely mount , what locktite for the two screws, red or blue? How much torque?
Sent from my iPhone using Tapatalk Pro
-
Hello, I've settled on JHP 121 gr. several years ago. To me, they seem to fit nicely in the middle, between the 115 and 124 with the JHP design being very accurate and the cleanest for the comps.
What he said [emoji106]
Sent from my iPhone using Tapatalk Pro
Unburned powder
in Open Pistols
Posted
I was testing my new 9major topend and seeing how much gas was being expelled forward (with the bullet) rather than upwards by the popple holes and compensator.
I was shooting a heavily pasted target at 6 inches and seeing how many pasters would fly off .
This is my current configuration, shooting 121 MG under 9.2gr of 3N38 @ 1.170.
Anyway, I notice not a lot of disturbance in the pasters (good) but did notice unburned powder on them.
Is there any change I can do to have 100% powder burn?
Sent from my iPhone using Tapatalk Pro