RippSpeed

Its cool planning on running these 9lbs of dolo at local match.

Anyone got a base line for me ??? I run a 3.9gr behind a 200gr bear creek and wsrp ... makes 173pf.

Anyone have loads for Solo1000 and 135gr Bear Creeks... Was loading 3.4grs of N320 to make minor.

Love this trigger !!! going to run production after Nationals ... Maybe run Area 2 as a unclassified ... http://youtu.be/TTbxnasN-WA

Heres my Phoenix Trinity Thumb Rest with newly fitted Titanium Grip ....

once fired only !!! the place I buy it from has the brass cleaned and casepro'ed ... ready to load I get my once fired @ $165 shipped for 6000

because I use small rifle in my limited STI and open ... so I gave up a extra 1lb of trigger pull for the convenience of using 1 primer for everything I load...

Yes but not when u cut the 3 coils off the safety block spring and use the 4lb striker spring.I had to use the 6lb trigger return, the 4.5lb striker and the uncut safety block spring.

Just an update. I finally got to run my glock enough to give it a good review. I ended up using the 6lb trs and the 4.5lb striker to have complete 100% reliability with small rifle primers. All of the. Light off but the trigger pull is alot heavier than with the 4lb striker spring. Dont matter if its alittle heavier the short reset; almost no travel and 100reliability makes it worth the extra lb on the trigger pull.

I picked up one of those plates for 5.56... WAY better than the Dillion plates. Don't know when Tlee got his plates that are machined wrong, but, he did tell me when I bought mine, that his machinist was doing them by hand. They, including my plate, are now fully CNC'd. Aahhh either going to give them a try... if they dont work will review personally.

Um yeah I can talk to Tiffany too...

Could someone post a picture of one of these with the detent drilled out? here

Could someone post a picture of one of these with the detent drilled out? I'll post a pic tonight when I get home ... My detent has already been drill out by my gunsmith

Ran 250+rds on the gun with the PT pedal ... Absolutely love it !!! Now I can compare it to the GoGun Pedal in pluses and minus GoGun vs PT + definitely solid ( its on there - Still iffy on durability + controls recoil good ( by thumb pressure) + controls recoil better ( by thumb pressure and tighter weak hand grip) - looser / lazy grip + tighter grip - drills holes in frame to utilize + leaves frame alone -heavier than the PT unit + lighter than the GoGun over all I'm sold on this PT Pedal !!! I'm converting everything ... Only now is I wished they made this in a Titanium !!!

Figured it out... one of the stations on my shell plate got chipped.

I like it ... dry firing with it how many rounds have you guys have on yours ???

DougC; yes this is on my 40sw 1050 ... my 9mm 1050 it just hums I bought these brass from a vendor and it seems like what you said might be the case... It just started happening with this batch of brass... And I have no case pro ... but I am running a EGW U die, a Redding Comp Die and a Lee Factory Crimp...

DougC But I sometimes catch crush before I drop the powder ... So it cant be the powder charge station. I have to re-check all this crap ... I have 2 culprits 1 = the brass 2 = the shell plate is worn out ... but I've only had this damn thing for 2 years and ran no more than 70k thru the press.

nope ... then I would notice the jam / crushed case in station #2 ( decapping and sizing ) ... And I only notice to catch the crush brass right at station #5 ( powder charging station )... My eyes are usually at attention on station #1 , powder bar and bullet seating station...

Dont need to look ... I already have the answer to all these... my machine runs smooth when it index between stations. The shell plate is still good but showing signs of wear from use... Depriming which is the 1st stage works. Because all the crush brass have brand new primers in them...

unless its wrong from the factory ... its the same one I've had since I bought this thing brand new

I was playing with the PT unit ... I think I definitely need to have the detent drilled out ... Because it was going into slide lock with the thumb pressure I was doing ....

Anyone else having the same issue ??? It seems to happen on 2nd or 3rd station... Most likely the 2nd ... I have a bunch of once fired brass and some are not sitting correctly in the shell plate. Easy enough I can pull it out without much force. And most of the time it doesnt get fed into the shell plate correctly. Is this a brass issue or a shell plate issue

So what your saying is you guys didnt even drill the detent hole on the slide stop ???

did anyone have to fit their PT thumb rest ???