Scootertheshooter

Ditto same here. Ipad and iPhone still no go

Somewhat related to this but my primer plunger assembly started getting gunk under it not letting it recess all the way. I discovered this bit it must have been doing it for a while since there wa a slight grove in the bottom of the primer disk from the plunger rubbing on it. After soaking it in hoppes amd ultrasonic it several times it's back to being flush. I wanted to take it apart but it seemed you needed 5 hands to do it then getting it back together didn't look promising . Just thought I would throw it out there for others

Ditto

A cmj with a receptacle end ? Now that's a hot load !!!! Oh no did I just go there?

Does anyone know what weight the steelmaster main spring is that comes from STI?

Just ordered a tool less GR from dawson and 7,8,9 and 10 lb spring I will see what happens

What size FLGR do you use for a steelmaster?

I have a Trojan in 9 as well as a edge in 9 and I can't tell the difference . This is only up to 25 yards but seems to be the same. Both have been worked on by Bob at Brazo.

For $150-200 you can make a pretty good custom basic sturdy bench. I picked up a Formica counter that was a little damaged at lowes that was 10 foot for like $75. Got a bunch of 2x4's and had some plywood laying around but even of I didn't for less than $150 you could get all the materials needed. I would even have them cut the wood so it could go together like a kit after you figure out what you want . I mounted it right to the wall so it's not going anywhere. The cabinets and bench to the right was from my kitchen remodel so I already had that stuff. The Formica is extremely easy to clean and holds up well. I did add a second 650 a couple of years later

Which one is best for accuracy ?

Sorry my bad it would be 115 in 9

Does anyone have a good minor load for a JHP with HS-6 out of a comp gun? This will primarily be used for falling steel

Mobil 1

Has anyone shot bayou bullets out of a comp? Or any lead bullet for that matter . How bad does the comp get?

I have a steelmaster and wanted to get one of those" drop in trigger". Does anyone have experience with the Brazo and or the Extreme engineering one? Would it be better to bring it to a smith instead of getting one of these? Do they really make a difference too? Just figured someone may have feedback

Great idea and creative. Personally I would get the case feeder first, it's less convenient to place the bullet than to keep feeding cases, IMHO

They look tall but I would be curious on how tebattach

What's the PVC pipe for on the right'?

Do you have an oal?

This would just be for steel and probably icore

Minor sorry

Does anyone have some load data for .38 super and a 160g bayou with solo 1000?

Does anyone have some load data for .38 super and a 160g bayou with solo 1000?

True , I will be using it in a 627. I was wondering on others experiences that they found out

Which one has better accuracy? In your opinion