Search the Community
Showing results for tags 'limited pro'.
Found 7 results
-
Hi all, I have installed: xtreme sear BOLO Titan Hammer Extended firing pin block PD firing pin reduced and regular power sear spring (tried both - originally reduced power was in) Initially after I installed the extended FPB I was able to push on my firing pin with the hammer back and it would catch correctly (manual safety off). Now when I push on my firing pin I'll get a little resistance (2lbs or so) and then the firing pin goes forward. Taking a look at the top of my sear where it engages the XFPB I see that it has a flat point on the right arm. Did i wear out the sear? Did i wear out the XFPB? Round count is probably 7000 or so on these parts. How do I fix this? Thanks.
-
I figured I would ask the tribe on this one..... Does anyone know where I can find a 2016 Tanfoglio Limited Pro in either 9mm - 38 Super - .40 (no 45 ACP please) As I understand it, the 2016 frame beaver tail was shaved down slightly from the factory to fit the IDPA box. I prefer a NEW one. But would consider a almost new. Prefer it to be stock with no mod's. I do not mind a .40 because I can load .40 minor for it. I figured that someone in the group might know a shop where one is sitting. Thanks for any help.
-
I saw a youtube video today which point out the illegality of Titan hammer on Ltd Pro in IDPA SSP division, here is the rule I found from the 2017 IDPA rule book, IDPA Rule 8.2.1.2 section C. Magazine releases, slide stops, safety levers, de-cocking levers, hammers, and triggers, that are stock on one SSP legal firearm may be used on another SSP legal firearm from the same manufacturer provided they are drop in replacements. Parts in this list must come factory installed on standard production firearms. Special parts that are available installed only from a factory custom shop are not eligible in SSP. From what I understand, this rule kicks out both Delta and Titan hammer, possibly other extreme parts as well. What do you guys think?
-
Hi guys, Parts list as of when this issue was happening. EGD Xtreme Tanfoglio Sear Tanfoglio Optimized Firing Pin Spring Tanfoglio Optimized Hammer Spring 12lb Tanfoglio Optimized Trigger Return Spring - Reduced Power EAA/Tanfoglio Witness Long-Slide 8lb Recoil Spring Tanfoglio Optimized "BOLO" Interrupter EGD Xtreme Titan Hammer EAA / Tanfoglio Witness Reduced Weight Trigger Plunger Springs Set by Henning (Using 18lb) EAA / Tanfoglio Witness Large Frame DA/SA Trigger w/ Over-travel Stop (102014) Pretty decent polish job Using these cheap mags - https://www.cdnnsports.com/eaa-witness-large-frame-9mm-17rd-afc-magazine-oe.html?___SID=U Anyone experienced this issue? Load 3 rounds in the magazine -> fire -> case ejects picks up the next round in the mag but the last bullet is so far forward that it is hitting the feed-ramp and preventing the round from seating. Press mag release -> bullet / mag drops out of the way and slide closes correctly on the 2nd to last round. Anyone had this before? Why is the second to last round riding forward so far to hit the feed ramp inside the gun? I'm going to put the original recoil spring back in tonight and give it a test tonight at the range. I've also put the 20lb plunger spring back in due to ARy's suggestion in another thread - Will probably go back to factory 22lb soon.
-
Here's what I'm running in my Tanfoglio Limited Pro EGD Xtreme Tanfoglio Sear Tanfoglio Optimized Firing Pin Spring Tanfoglio Optimized Hammer Spring 12lb Tanfoglio Optimized Trigger Return Spring - Reduced Power EAA/Tanfoglio Witness Long-Slide 8lb Recoil Spring Tanfoglio Optimized "BOLO" Interrupter EGD Xtreme Titan Hammer EAA / Tanfoglio Witness Reduced Weight Trigger Plunger Springs Set by Henning (Using 18lb) EAA / Tanfoglio Witness Large Frame DA/SA Trigger w/ Over-travel Stop (102014) Pretty decent polish job Trigger is down to 5 3/4lb DA and 2 3/4lb SA. Not the best but I'm still working on that. Really happy with it so far and it's been 100% with Federal primers - either Atlanta Arms or Cook Ammunition/ Last week at IDPA I was out of my regular practice ammo so I grabbed a box of 124gr Sellier and Bellot ammo and had this happen... I've read the forum and know I might need to get my barrel reamed to SAAMI spec? So I made another short video. Does this barrel fail the plunk test? That brings me to my question. S&B primers are harder than federal but they aren't that hard right? What are my next steps? I'm thinking grab the PD firing pin when it releases for sure. But does my barrel need work too? Thanks guys.
-
So I had some ammo issues with my rounds not chambering fully in my limited pro. I beleive that they were set at 1.09 OAL, but they were acting like they were too long. I ended up swapping out to my stock 2 and it ran through the ammo with no issues at all. What is everyone specing their OAL at for their limited pro's?
-
This should be an easy one for you guys. I've been searching on the internet looking for a holster for my Limited Pro. I thought I finally found one, but the vendor says it would be loose since it was actually built for the limited. What are my holster options for the limited pro? Is it close enough, dimensionally, that I can just search for it under another model name? I've found almost every Tanfo model but the limited pro. Thanks in advance.
