Search the Community
Showing results for tags 'case'.
Found 3 results
-
I resurrected an old AR-15 soft case to use for my new PCC rifle... It's good for carrying an AR rifle to the range and back, but not so good for bagging and unbagging a rifle at each stage... The rifle gets caught in the soft padding and is cumbersom to take out and put away after shooting a stage. Any of you all have an AR-9 range case that you like for competitions?
-
Can anyone point me to a shotgun case that will fit an m2 with the longest Nordic extension tube?
-
Hello, and thanks in advance for your time. I'm reloading 9mm Luger on an older 550B, although the dies are brand new. I'm an experienced loader although new to 9mm. My issue is bulging at the case base. It doesn't happen consistently, but I would say 1 every 75 rounds. I'm loading 124gr jacketed with around 8.0grains of HS-6 and CCI small rifle primers. It's a pretty hot load, but I'm shooting 9mm Major through an STI Matchmaster. The bulges are barely visible but they are causing the gun to not go into battery, leaving the slide about 1/8 of an inch away from locking up. The jam is then very difficult to free as the cartridge is really wedged in the barrel. My OAL on the cartridge is in line with published data, and like I said, 98% of cartridges are fine and no issues with feeding. I've played around with the crimp and it seems to be well adjusted, same comment as previous, 98% of rounds are perfect. It just seems bizarre that it's only happening about once every 75 rounds. I'm chamber checking everything, which I do for match rounds anyway but I'm shooting 800-1000 a week so that's a pain! Again, thanks and fingers crossed you can help me!
