saibot Posted January 5, 2010 Share Posted January 5, 2010 Hi experts! I've been working up a load with MT 55 bullets and about 25 grains of A2230 which is shooting very well with my once fired LC brass. I have quite a bit of PMC .223 brass that I was wondering if I can use as well. Will it work with the same charge or will the pressure be too high? Thanks! Link to comment Share on other sites More sharing options...
jaredr Posted January 5, 2010 Share Posted January 5, 2010 Hi experts! I've been working up a load with MT 55 bullets and about 25 grains of A2230 which is shooting very well with my once fired LC brass. I have quite a bit of PMC .223 brass that I was wondering if I can use as well. Will it work with the same charge or will the pressure be too high?Thanks! acurrent accurate arms data lists 25 gr of 2230 as max load for a 55 gr nosler ballistic tip. keen to hear what others will say, for an unexpert opinion my $.02 would be to try 10% down from that in your pmc brass and work up to look for pressure signs. i wouldn't start out with 25 gr as my first loading. -jared Link to comment Share on other sites More sharing options...
Graham Smith Posted January 5, 2010 Share Posted January 5, 2010 Hi experts! I've been working up a load with MT 55 bullets and about 25 grains of A2230 which is shooting very well with my once fired LC brass. I have quite a bit of PMC .223 brass that I was wondering if I can use as well. Will it work with the same charge or will the pressure be too high? From what little I know, that seems pretty much at the upper limit. What kind of velocity are you getting with that load? Link to comment Share on other sites More sharing options...
saibot Posted January 5, 2010 Author Share Posted January 5, 2010 Hi experts! I've been working up a load with MT 55 bullets and about 25 grains of A2230 which is shooting very well with my once fired LC brass. I have quite a bit of PMC .223 brass that I was wondering if I can use as well. Will it work with the same charge or will the pressure be too high? From what little I know, that seems pretty much at the upper limit. What kind of velocity are you getting with that load? GrahamSmith- I'm still working out the exact charge on the LC brass. I've been working up in small steps and see no signs of pressure up to 24.5. I haven't worked up any past that yet since I was waiting on my swagger to arrive (reaming wasn't working out for me), but now it's here and I was going to continue to work up to the max load and see which worked out best. I haven't chrono'd anything yet. Once I have a few through at the higher end and see no pressure issues I'll work up a small batch of the favorites and chrono those. So far it's been a great combination from 23.5 to 24.5. I'm shocked at how much better they are than factory! Is .223 brass inherently weaker than 5.56 brass? Does it even matter? Thanks again for the help! Link to comment Share on other sites More sharing options...
Graham Smith Posted January 5, 2010 Share Posted January 5, 2010 As I understand it, milspec 5.56 brass is thicker than sporting .223 because it is typically loaded to higher pressures. Link to comment Share on other sites More sharing options...
Bryan 45 Posted January 6, 2010 Share Posted January 6, 2010 Thicker brass (Lake City) leads to higher pressure from the same charge because of reduced case capacity. So, in theory the PMC brass w/ the same charge should yield lower pressure than the LC. As always, reduced 10% and work back up. Link to comment Share on other sites More sharing options...
Triggerbender Posted January 9, 2010 Share Posted January 9, 2010 (edited) This answered alot of my ?????????? when I was starting my research. All of them as a matter of fact and I use the link to Sierra load data for the AR alot also on that Page http://www.6mmbr.com/223Rem.html Edited January 9, 2010 by Triggerbender Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now