boo radley Posted March 31, 2009 Share Posted March 31, 2009 I'm well into my 3rd year with the 650, and, switching out the primer punch for large and small primers kills me. Any special tools? Anything I try involves painful 1/8" turns, and pulling out the damn primer ramp and primer cup holder yields a marginal improvement (to exaggerate), and requires two DIFFERENT sized hex wrenches, and working upside down. Dillon -- what about a screw in the end of the punch? Not to complain, but this really is vexing - the rest of the change-over is no big deal. Steve Link to comment Share on other sites More sharing options...
dillon Posted April 1, 2009 Share Posted April 1, 2009 Boo, Cheat! First, remove the nylon primer cam, attached to the upper right side of the frame by one allen bolt. No adjustment, it is either on or off. With this off, pull the handle down-you now have much more room to swing the wrench. Easy! Link to comment Share on other sites More sharing options...
boo radley Posted April 3, 2009 Author Share Posted April 3, 2009 Boo,Cheat! First, remove the nylon primer cam, attached to the upper right side of the frame by one allen bolt. No adjustment, it is either on or off. With this off, pull the handle down-you now have much more room to swing the wrench. Easy! I, uh, never even thought about removing that part. Looking at it....you're right! Thx, Dillon. I'll try it next time. Link to comment Share on other sites More sharing options...
kmitchl Posted April 3, 2009 Share Posted April 3, 2009 The threads in the platform on mine were tight so I had to turn it out one flat at a time with a wrench. I chased the threads with a tap and can now turn the punch by hand until it is snug and the tighten with one turn of the wrench. Much easier. Link to comment Share on other sites More sharing options...
Gregory_k Posted April 6, 2009 Share Posted April 6, 2009 I use a stubby wrench and only snug tight. I do not have to remove any other items. I do put a small amount of antiseize on the threads. Link to comment Share on other sites More sharing options...
Blazer Posted May 22, 2009 Share Posted May 22, 2009 (edited) Boo, was just about to post the same question but found this on a search. Thanks for the idea Dillon> Tried it today, works like a charm. 1,2,3 changed! Edited May 23, 2009 by Blazer Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now