Building up an over-relieved trigger guard

[chp5]

I releived the underside of the trigger guard on a frame for a LTD gun too much.

Should I just use quick setting epoxy to build it up and reshape it?

Thanks.

[JThompson]

There is a thread around here where a guy rebuilt one that was broke... good stuff there.

EDIT: Here it is... I see no reason it wouldn't aplly to a Glock as well.

http://www.brianenos.com/forums/index.php?...r+Trigger+guard

Edited May 12, 2008 by JThompson

[chp5]

Thanks JT.

[mike cyrwus]

Cy, make sure you scratch up the surface that you are bonding the epoxy to, and clean it off with mek or even brake cleaner and then blow it dry before you hit it with epoxy. If you add a just a little less hardener to the resin, you will maintain a little flexibility. Acraglass gel would be ideal, but if you use some of that 2 -part epoxy squeeze tube, go for at least a 60min set, or preferably, a 2 hour set epoxy.

[chp5]

Thanks Mike.