00bullitt Posted October 31, 2007 Share Posted October 31, 2007 Temperature was 67 degrees and 48% humidity Primers were Winchester small pistol magnum and bullet was Zero 125 JHP with regualr plain ol Hodgden Clays Crimp was using Lee factory crimp die 1/2 turn after contact and EGW "U" sizing die These were shot out of my Glock 34 with Bar Sto and factory barrel for comparison First load was 3.6 grains of Clays loaded to 1.125"oal shot from Bar-Sto Mixed brass Bar Sto-1028,1053,1021,1033,1024 for an average of 1031.8 PF=129 Starline Brass Bar Sto-1025,1028,1022,1021,1029 for an average of 1025 PF=128.1 Mixed brass from Factory Glock Barrel- 1055,1065,1070,1079,1057 for an average of 1065.2 PF=133.2 I'm assuming that the Glocks polygonal rifling attributes to higher velocity. Loads felt soft and almost comparable to Atlanta Arms 147 Match. Slide tracked well but IMO could be a tad snappier like the AA load. But for someone looking for soft......this is soft.There was no visible smoke and no pressure signs. Link to comment Share on other sites More sharing options...
Fireant Posted October 31, 2007 Share Posted October 31, 2007 How was the accuracy? Link to comment Share on other sites More sharing options...
Harmon Posted October 31, 2007 Share Posted October 31, 2007 i shot some today loaded with ranier 115 round nose and 3.7 grains of clays at 1.145" 1120 fps in the factory barrel Glock 34 1107 fps in the storm lake Glock 34 barrel shoots about 3 inches at 25 yards with the storm lake tube, and a bit better in the glock barrel. Link to comment Share on other sites More sharing options...
Fireant Posted October 31, 2007 Share Posted October 31, 2007 I might have to try these in my M&P. I tried N310 one time, but didn't care for it. Link to comment Share on other sites More sharing options...
eerw Posted October 31, 2007 Share Posted October 31, 2007 Have similar load.. 3.5 of clays with a MG124CMJ 1.125 OAL with WIN spp out of CZ SP01 about a 128-129PF Link to comment Share on other sites More sharing options...
00bullitt Posted October 31, 2007 Author Share Posted October 31, 2007 I didn't shoot it for accuracy. I ran out of time. Link to comment Share on other sites More sharing options...
Allgoodhits Posted November 3, 2007 Share Posted November 3, 2007 I didn't shoot it for accuracy. I ran out of time. Why bother to do one without the other? For economy of components and time, do both at the same time if necessary. To each their own. Link to comment Share on other sites More sharing options...
Rptstoy1 Posted November 4, 2007 Share Posted November 4, 2007 Where can you still get Zero 125gr JHP bullets? Roze's dist. has been out of stock for sometime. thanks for any info. Link to comment Share on other sites More sharing options...
00bullitt Posted November 5, 2007 Author Share Posted November 5, 2007 Got them from Angus at ghostholster.com Bought a stockpile of 125's and 135's about a month ago. The 135's make a sweet ass load with clays too BTW. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now