Got any published load data for WST for 45 ACP and plated bullets

[Gunsmoke55]

Anyone have favorite site for published load data for WST in 45 ACP? Plan to load some 200 gr SWC plated using WST which is said to be clean burning for 45 ACP.

 

[Gunsmoke55]

One caveat… I do not need to make major power factor, just want to plink with sufficient powder load to get clean non sooty cases using my 200 gr SWC plated bullets. Starting my project with plated X-tremendous bullets. Later, will buy some Missouri or Bayou coated bullets, probably 200 gr RN. Long range goal is to collect up the stuff: a mold or two, handle, lead, tin, etc., to roll my own…without breaking the bank.  I have the Lyman 25 furnace which I got….then pandemic hit. Still hope to get to casting my own.

[Dr. Phil]

Plated and coated bullets are recommended to load with lead bullet data.

 

[pbcaster45]

Here's two...

 

Bullet:  Hornady 200 gr. C/T Match
Powder:  Winchester WST 4.5 grs.
Primer:  Federal 150
Case:  Federal
LOAL:  1.245
Recoil Spring:  16 lbs. (no buffer pad)

 

Bullet:  H&G #68 200 gr. SWC (Oregon Trail)
Powder:  Winchester WST 4.5 grs.
Primer:  Federal 150
Case:  Winchester   
LOAL:   1.245
Velocity:  825.94 fps  
ES:  14.06
SD:  5.09
PF:  165
Recoil Spring:  16 lbs. (no buffer pad)