Whoops! Posted January 27, 2020 Share Posted January 27, 2020 Is there enough real estate in front of the lugs on an officer length barrel (3.5") to fit a cone comp? Thanks. Link to comment Share on other sites More sharing options...
Descartian Posted January 27, 2020 Share Posted January 27, 2020 I’m not a smith but I would assume if it’s a bit long you could trim the cone down and laser weld it to the barrel. Then recontour if necessary. Link to comment Share on other sites More sharing options...
Whoops! Posted January 27, 2020 Author Share Posted January 27, 2020 I was thinking about trimming and welding, but didn’t even know laser welding was a thing. Thanks for the tip. Link to comment Share on other sites More sharing options...
MadBomber Posted January 27, 2020 Share Posted January 27, 2020 There should be enough. Several years ago, there was a trend with the super short open guns. A lot of them only had like 3 inch barrels or so. Link to comment Share on other sites More sharing options...
HIREDgun45 Posted January 27, 2020 Share Posted January 27, 2020 EGW makes a comp for the Officer's: https://www.egwguns.com/cnc-carry-comp-officers-comp Link to comment Share on other sites More sharing options...
Whoops! Posted January 27, 2020 Author Share Posted January 27, 2020 I’m leaning more toward: https://www.egwguns.com/cnc-9-port-6-chamber-comp-cone Link to comment Share on other sites More sharing options...
Descartian Posted January 27, 2020 Share Posted January 27, 2020 24 minutes ago, Whoops! said: I’m leaning more toward: https://www.egwguns.com/cnc-9-port-6-chamber-comp-cone On an officers sized Gun? The comp will be longer than the barrel. Link to comment Share on other sites More sharing options...
Whoops! Posted January 28, 2020 Author Share Posted January 28, 2020 19 hours ago, Descartian said: On an officers sized Gun? The comp will be longer than the barrel. Link to comment Share on other sites More sharing options...
HIREDgun45 Posted January 29, 2020 Share Posted January 29, 2020 On 1/27/2020 at 3:34 PM, Whoops! said: I’m leaning more toward: https://www.egwguns.com/cnc-9-port-6-chamber-comp-cone Curious, what load/caliber do you plan on shooting that will drive and cycle a 9 port 6 chamber comp with a Officer's barrel? Link to comment Share on other sites More sharing options...
Whoops! Posted January 29, 2020 Author Share Posted January 29, 2020 I'm willing to bet that I can get it to run on 115 grain WWB. But, I'm planning on something a little more peppy. 9 major. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now