Can the RL 1050 and Super 1050 Toolheads interchange?

[minnesota1]

Are they different or the same?  I know most things are interchangeable, but wondering about the toolheads as they are a little more complicated.  If they are different, what's the differences?  If you have any pictures of the differences I'd appreciate seeing them.  I'm new to the 1050's.

 

Thanks.

[dillon]

The ONLY difference between the RL1050, Super 1050 and RL1100 toolheads is the ratchet. The stroke length varies between each of these loaders, therefore the length of the ratchet on the back of the toolhead varies as well.

[minnesota1]

53 minutes ago, dillon said:

The ONLY difference between the RL1050, Super 1050 and RL1100 toolheads is the ratchet. The stroke length varies between each of these loaders, therefore the length of the ratchet on the back of the toolhead varies as well.

So then with the ratchet it wouldn’t be compatible?  Or would a super 1050 work on an rl 1050 since the ratchet would be longer because of the longer stroke? And a RL 1050 wouldn’t work on the S 1050 because it would be too short?   Or neither?

 

thanks!

[DJRyan13]

Add an autodrive and get rid of ratchet.

[dillon]

You need to install the appropriate ratchet for the loader the toolhead is being used on. The ratchet is held on by the primer camming bolt. No adjustment to it, it's either on or off.