jcc7x7 Posted January 18, 2020 Share Posted January 18, 2020 It's the time of year to work loads up right!!! LOL I'm down to my last 2-3lbs of Clays Australian Been using a lot of e3 for 9mm and 40 major loads A few years ago I believe I remember some of y'all where using Clays recipes as a start for e3 I've done that with 9mm and 40 but just double checking Been using 3.8grs Clays with a 230 Bayou, CCI LPP, col1.250ish So my thought is 3.8grs of e3 with the 230 as a start and then chrono up as needed from there. Anyone with chrono results on e3 and 230 coated bullets I'd appreciate your input. Thanks y'all Link to comment Share on other sites More sharing options...
Sr1911 Posted January 21, 2020 Share Posted January 21, 2020 3.7 to 4gr has worked good for me of e3 Link to comment Share on other sites More sharing options...
jcc7x7 Posted January 21, 2020 Author Share Posted January 21, 2020 Sr1911 Thanks Link to comment Share on other sites More sharing options...
Dwbsig Posted January 24, 2020 Share Posted January 24, 2020 This is what I got from a Glock 21 and e-3. e-3 powder 3.6 grs cci-300 225 gr bayou flat point. 1.225 oal rem. Brass fps 757 es 82. Sd 34 Ran the same bullet and everything the same with red dot red dot 4.5 grs 799/45/20 I have been playing with e-3 in 9mm and 45 acp and so far I have been getting high extreme spreads with e-3 but j have been getting good accuracy. I have also been playing with red dot in 45 acp with 200 gr swc and 225 fp and have been getting better crony readings with good accuracy. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now