GregJ Posted January 17, 2020 Share Posted January 17, 2020 Just put an Odin Extended Mag Release on my Gen II MPX. I'm still kinda iffy on it, though I have only dry fired a little bit with it so far. The fitment has me a little puzzled. I had to back the mag release screw out 2-3 turns from flush from the button top in order to get the mag to release. Any further in and the right side paddle interferes with the lower and will not drop the mag. If the paddle were angled away from the lower (like the left side paddle) instead of into the lower, it might help with this. With it backed out so that the mag freely drops, it feels like the button may be out too far and may not have enough support from the lower. I lubed it wet, and that seemed to help some. Maybe need more break in/dry fire/etc. Anyone else run into this? I plan on contacting Odin today and see what they say. Link to comment
George16 Posted January 17, 2020 Share Posted January 17, 2020 I ran into the same problem before Odin release the MPX specific mag release. If I were you, I’ll just return the XMR and buy the MPX specific mag release to save yourself from aggravation and frustration when it work properly at the time when you needed it to work flawlessly. Just my .02. https://www.rainierarms.com/odin-works-mpx-extended-magazine-release/ Link to comment
GregJ Posted January 21, 2020 Author Share Posted January 21, 2020 On 1/17/2020 at 6:44 PM, George16 said: I ran into the same problem before Odin release the MPX specific mag release. If I were you, I’ll just return the XMR and buy the MPX specific mag release to save yourself from aggravation and frustration when it work properly at the time when you needed it to work flawlessly. Just my .02. https://www.rainierarms.com/odin-works-mpx-extended-magazine-release/ Sorry used the wrong abbreviation (effect of too much googlin). it is an MPX specific mag release. I got it from Springer Precision. https://shop.springerprecision.com/Odin-Works-Sig-MPX-Mag-Release-MPX-MR-MPX-MR.htm It does seem to be breaking in and working better. Link to comment
George16 Posted January 21, 2020 Share Posted January 21, 2020 22 minutes ago, GregJ said: Sorry used the wrong abbreviation (effect of too much googlin). it is an MPX specific mag release. I got it from Springer Precision. https://shop.springerprecision.com/Odin-Works-Sig-MPX-Mag-Release-MPX-MR-MPX-MR.htm It does seem to be breaking in and working better. Glad it’s working better now. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now