mwx40x40 Posted March 24, 2019 Share Posted March 24, 2019 Apex site says only tested with 9mm Glock’s 17;34,19 only. Anybody ever use one in 40 cal glocks? Link to comment Share on other sites More sharing options...
dskinsler83 Posted March 24, 2019 Share Posted March 24, 2019 Its cut as a 9mm extractor not for a 40. The claw is different Link to comment Share on other sites More sharing options...
mwx40x40 Posted March 25, 2019 Author Share Posted March 25, 2019 2 hours ago, dskinsler83 said: Its cut as a 9mm extractor not for a 40. The claw is different Guess I’ll be sticking with OEM and a new spring. Been getting sporadic failure to extract on G 24. Link to comment Share on other sites More sharing options...
dskinsler83 Posted March 25, 2019 Share Posted March 25, 2019 Just used the non loaded chamber load bearing in the spring and maybe pic up a fresh 40 extractor the thicker bearing ( its the thick white one, not the thin wide one) increases the tension on the exctractor. As for a new extractor even getting the older Non Loaded Chamber Indicator Extractor is said to help as well with the thicker bearing. Also make sure the claw is free of thick carbon and debris build up. Regards, DK Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now