Jerrymarsh Posted July 8, 2017 Share Posted July 8, 2017 (edited) Just bought all parts to build a 9mm for PCC anyone use them ==== Hows it working out Edited July 8, 2017 by Jerrymarsh Link to comment
Les Snyder Posted July 8, 2017 Share Posted July 8, 2017 Jerry... my PCC is a New Frontier Armory billet lower with an A1 stock ... I use their modular bolt with the AR 5.56 style extractor, in a Palmetto State Armory upper (throat reamed)... my original NFA blue steel firing pin broke at about 400 rounds... they immediately replaced it with a stainless version (that I rounded the end of ) and has been working fine for over 4000 rounds.... Link to comment
MRBACKHAND Posted July 8, 2017 Share Posted July 8, 2017 I use the NFA lower with the NFA side charge upper with no issues. I would recommend the Odin mag release over the stock one. Link to comment
1911luvr Posted July 9, 2017 Share Posted July 9, 2017 I have three NFA lowers and both LRBHO NFA upper- one side charger and one standard. Highly recommend them!Sent from my iPhone using Tapatalk Link to comment
longbeard Posted July 9, 2017 Share Posted July 9, 2017 No real issues. If a glock lower I would stongly recommend the taccom feed ramp. Strongly recommend Odin mag release as suggested earlier. Link to comment
Ofishl1 Posted July 10, 2017 Share Posted July 10, 2017 (edited) Just put together the NFA upper sidecharger with matching lower LRBHO, t The Hiperfire trigger and KAK 7.5 buffer are running fine, test fired 7 different powders and find it runs best at 1000- 1050 feet per second, smooth no hiccups. Under 900 fps cycling gets erratic, other wise its has been a fine system nice quality. Curious about the JP springless system though, maybe some more testing with a heavier buffer... Edited July 10, 2017 by Ofishl1 Link to comment
Les Snyder Posted July 10, 2017 Share Posted July 10, 2017 Ofishl1... when you go heavy, keep an eye on the amount of battering to the bolt face and barrel Link to comment
goldfish Posted July 10, 2017 Share Posted July 10, 2017 I use both NFA lower and side charging upper, KAW valley buffer,barrel and RRA trigger with no issues so far. If it ever does their customer service responses to emails and if needed i can go to their store. Link to comment
Jerrymarsh Posted July 10, 2017 Author Share Posted July 10, 2017 Well it looks like im going in right direction on my build Thanks a lot Guys Link to comment
Jerrymarsh Posted July 13, 2017 Author Share Posted July 13, 2017 Gun is built going to range tomorrow I hope see if it cycles rounds Link to comment
Ofishl1 Posted July 13, 2017 Share Posted July 13, 2017 On 7/10/2017 at 5:49 AM, Les Snyder said: Ofishl1... when you go heavy, keep an eye on the amount of battering to the bolt face and barrel Will do...thx! On 7/10/2017 at 5:49 AM, Les Snyder said: Ofishl1... when you go heavy, keep an eye on the amount of battering to the bolt face and barrel How did it go? Link to comment
Jerrymarsh Posted July 13, 2017 Author Share Posted July 13, 2017 1 hour ago, Ofishl1 said: How was the range test? Didn't make it today hoping in morning need to invest in a new Red Dot Link to comment
Les Snyder Posted July 14, 2017 Share Posted July 14, 2017 Jerry... if you are considering a red dot that use a tubular battery like a AAA that is in-line with the bore, the added recoil of the blow back 9mm may cause problems....a friend had problems with the factory battery spring allowing the battery to move, momentarily losing contact... causing fluctuation of the dot....I haven't had any problems with the 2032 style coin batteries in my SPARC or Spitfire Link to comment
Jerrymarsh Posted July 14, 2017 Author Share Posted July 14, 2017 2 hours ago, Les Snyder said: Jerry... if you are considering a red dot that use a tubular battery like a AAA that is in-line with the bore, the added recoil of the blow back 9mm may cause problems....a friend had problems with the factory battery spring allowing the battery to move, momentarily losing contact... causing fluctuation of the dot....I haven't had any problems with the 2032 style coin batteries in my SPARC or Spitfire Thanks Less im looking at Dots on Internet now for on with a in-line battery Link to comment
1911luvr Posted July 14, 2017 Share Posted July 14, 2017 Thanks Less im looking at Dots on Internet now for on with a in-line batteryI highly recommend the C-more Railway 6moa!Sent from my iPhone using Tapatalk Link to comment
MRBACKHAND Posted July 14, 2017 Share Posted July 14, 2017 4 minutes ago, 1911luvr said: I highly recommend the C-more Railway 6moa! Sent from my iPhone using Tapatalk ^^^^ I second the C-More Link to comment
Jerrymarsh Posted July 14, 2017 Author Share Posted July 14, 2017 Been looking at C-mores were is best price at Link to comment
1911luvr Posted July 15, 2017 Share Posted July 15, 2017 Been looking at C-mores were is best price atHere in the Classifieds.Sent from my iPhone using Tapatalk Link to comment
Les Snyder Posted July 15, 2017 Share Posted July 15, 2017 I'm very happy with my Vortex SPARC and Spitfire... the SPARC is a single dot that is spherical even with my pretty bad astigmatism... the Spitfire is busy with the extra concentric ring, but etched to the prism so is not dependent on illumination for an aim point Link to comment
Jerrymarsh Posted July 15, 2017 Author Share Posted July 15, 2017 Im a big fan of Vortex going to check them out Link to comment
1911luvr Posted July 15, 2017 Share Posted July 15, 2017 I'm very happy with my Vortex SPARC and Spitfire... the SPARC is a single dot that is spherical even with my pretty bad astigmatism... the Spitfire is busy with the extra concentric ring, but etched to the prism so is not dependent on illumination for an aim pointMine must be worse because both of my Sparcs flare when I look at the dot. The C-more Railway and RTS2 don't. Sent from my iPhone using Tapatalk Link to comment
Ofishl1 Posted July 15, 2017 Share Posted July 15, 2017 I went to running 1 contact in my right eye when I started shooting open class...now do so in all divisions that I run a dot in....no more fuzzy dots. Link to comment
Les Snyder Posted July 15, 2017 Share Posted July 15, 2017 1911luvr....for open sights I use mono vision glasses with my near prescription in the entire lens of my dominant eye, and regular bifocal in the non dominant, just with the partition line moved up a couple of millimeters... for PCC just the regular bifocal... I get a spherical dot with the SPARC with the upper distant lens portion, but some flaring with the near vision lower portion... Link to comment
1911luvr Posted July 15, 2017 Share Posted July 15, 2017 1911luvr....for open sights I use mono vision glasses with my near prescription in the entire lens of my dominant eye, and regular bifocal in the non dominant, just with the partition line moved up a couple of millimeters... for PCC just the regular bifocal... I get a spherical dot with the SPARC with the upper distant lens portion, but some flaring with the near vision lower portion...How did you figure out to do this? Did you have an opthomologist that was a shooter? Would you change anything about the way yours are set up?Sent from my iPhone using Tapatalk Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now