jimbullet Posted April 24, 2017 Share Posted April 24, 2017 Hi, I am new to Tanfolgio. I heard that the frame on their 9mm and 40 variants are the same so would it mean that I only need an upper assembly plus the right magazines to convert say a limited custom in 40 to a 9mm? Are all parts interchangeable across models say between the limited custom and the HC extreme custom? Link to comment Share on other sites More sharing options...
MemphisMechanic Posted April 24, 2017 Share Posted April 24, 2017 (edited) There are at least two guys in this forum who have two Stock 2's in 9mm. A gun they shoot in matches, and a backup one. They cannot swap the slides between these two guns due to the wide variation in manufacturing tolerances found in the Tanfoglio platform. Others may chime in with their direct experiences with the Limited guns, but I would personally be cautious about planning to swap uppers around. Edited April 24, 2017 by MemphisMechanic Link to comment Share on other sites More sharing options...
johnbu Posted April 24, 2017 Share Posted April 24, 2017 (edited) They swap. Some minor fitting may be needed, but likely won't be. I have moved slides across multiple competition frames without issue. Standard frame "should" swap too, but i get interference there that would need extra clearance. With that said, some may need more tweaking to make slide A fit frame B. Tweaking that may result in slide A no longer fitting as well on frame A. So, your results may differ from mine as was mentioned previously and removing metal may give other issues. Edited April 24, 2017 by johnbu Link to comment Share on other sites More sharing options...
475480 Posted April 24, 2017 Share Posted April 24, 2017 I bought a 10MM Elite then bought a 38 Super slide assy from EAA , thinking it might need some fitting but the fit was tight but with a little oil and 25 rounds thru the gun, fit was very nice and 100% reliable. Sean Link to comment Share on other sites More sharing options...
IronArcher Posted April 24, 2017 Share Posted April 24, 2017 I've swapped out my Lim Pro slide with an Elite match and a standard steel witness without issue.Sent from my iPhone using Tapatalk Pro Link to comment Share on other sites More sharing options...
walrus76 Posted April 24, 2017 Share Posted April 24, 2017 Can I have a frame squeezed or clamped for a tighter fit? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now