wcube2 Posted January 17, 2017 Share Posted January 17, 2017 I was looking at changing out the roll pin hammer pin in a Full Size Steel Witnesses to the solid pin hammer pin & pin pin like in other models. On the instruction card with the Henning oversize hammer pin and reamer set it says "Do not try to install this on Tanfoglio models that uses the hammer roll pin!" Does anyone know the reason why this would not work on the full size steel frame? Thanks Wcube2 Link to comment Share on other sites More sharing options...
johnbu Posted January 17, 2017 Share Posted January 17, 2017 Frame isn't drilled for it. Asymmetric hole size. One side is larger than the other. Also, there is no keeper pin hole. Link to comment Share on other sites More sharing options...
wcube2 Posted January 17, 2017 Author Share Posted January 17, 2017 I know this is not a drop in change of parts. The hole for the hammer pin would need drilled out then counter sunk and a hole drilled for the keeper pin. Was wondering if there was some reason that a Full Size Steel Witnesses frame could not be upgraded to use the solid hammer pin? Thanks Wcube2 Link to comment Share on other sites More sharing options...
MemphisMechanic Posted January 17, 2017 Share Posted January 17, 2017 Why do you think a well polished roll pin isn't good enough? Or are you planning to take the gun apart a ton of times, and looking for easier disassembly? Link to comment Share on other sites More sharing options...
johnbu Posted January 17, 2017 Share Posted January 17, 2017 1 hour ago, wcube2 said: I know this is not a drop in change of parts. The hole for the hammer pin would need drilled out then counter sunk and a hole drilled for the keeper pin. Was wondering if there was some reason that a Full Size Steel Witnesses frame could not be upgraded to use the solid hammer pin? Thanks Wcube2 Ok, it should be possible. Probably easy for a good machinist. But seems like a crap ton of work for a dubious gain. Link to comment Share on other sites More sharing options...
wcube2 Posted January 18, 2017 Author Share Posted January 18, 2017 I have a CZ 75B with the hammer pin and keeper pin set up and thought all of the upper models of steel Witnesses pistols did also. Just looked closer at the pictures on the EAA website and saw that not all of the models above the full size steel Witnesses have the hammer pin and keeper pin. So I guess it is a case of - If it ain't broke don't fix it. Wcube2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now