weldon20 Posted June 9, 2015 Share Posted June 9, 2015 I have issues when connected to a standalone router(not internet connected)trying to pull the scoring information off the NST's we use as scoring devices onto the ipad mini we use as the master. Sometimes the search for the device(s) times out or the master will not see the devices. I have tried using the sync code but that does not help either. Everything works well when I walk into the clubhouse and connect to the internet connected wireless router we have there. Makes no sense that the other wireless connection would give me trouble. I have checked all the obvious issues such as: I am on the same wireless for all three devices I have a strong solid connection I can see the devices, most of the time I have tried moving the router closer to the shooting areas but that does not help I have used a cellular phone as a hotspot and that works I am too far away from the clubhouse router to use that connection and I can't move it Are there specific settings within the router that I need to change? Is there a specific router that I should use over another that is more reliable? What am I doing wrong? Link to comment Share on other sites More sharing options...
jdonohue Posted June 9, 2015 Share Posted June 9, 2015 Running same mix of ipad and nooks as you. (but don't have internet access in the clubhouse....) simple questions first.... what version of practiscore on the ipad? what version of IOS on the Ipad? what version of practiscore on each of the nooks? Link to comment Share on other sites More sharing options...
weldon20 Posted June 9, 2015 Author Share Posted June 9, 2015 I don't have in front of me but as of about a month ago they were the latest. I will get the version and let you know exactly, hopefully tomorrow Link to comment Share on other sites More sharing options...
weldon20 Posted June 9, 2015 Author Share Posted June 9, 2015 We are using a Trendnet Router Model TEW-652BRP. Practiscore version on ipad: 1.660 Practiscore version on Nook's: 1.2.27 Link to comment Share on other sites More sharing options...
euxx Posted June 9, 2015 Share Posted June 9, 2015 Check that "client isolation" mode/option is turned off. http://www.wirelessisolation.com/ Link to comment Share on other sites More sharing options...
gng4life Posted June 9, 2015 Share Posted June 9, 2015 More than likely, the MACs are not being found in the scan. I will look up that model tomorrow and see options it has and if it is doing anything crazy with STP or the forwarding. Link to comment Share on other sites More sharing options...
weldon20 Posted June 10, 2015 Author Share Posted June 10, 2015 Euxx, At this point I don't have the router but I will look at what you suggested ASAP and post my results. Thanks Link to comment Share on other sites More sharing options...
weldon20 Posted June 24, 2015 Author Share Posted June 24, 2015 Euxx I had the guy who currently has the router go into the setup to see if there was anything in it related to "client isolation" He could not find anything. I also looked through the .pdf version of the owners manual on the Trendnet website and could not find anything. Any other suggestions? Link to comment Share on other sites More sharing options...
euxx Posted June 24, 2015 Share Posted June 24, 2015 You can try to set it to B or G mode only. Also restrict access to router only to scoring devices and check that you are running the latest firmware. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now