Any Load Data for 40sw Major 200gr and Solo1000

[RippSpeed]

Anyone got a base line for me ??? I run a 3.9gr behind a 200gr bear creek and wsrp ... makes 173pf.

[zzt]

Here is some data another shooter received from the manufacturer. Data is for a 4" barrel. No COL was given and no bullets specified. Hope this helps.

Caliber: .40 S&W.

Barrel length: 4”

Powder: Accurate – Solo 1000

Bullet weight: 135 grains.

Start load: 4.8 grains (1100 – 1200 ft/p/sec)

Maximum load: 5.3 grains (1175 – 1275 Ft/p/sec).

Bullet weight: 155 grains.

Start load: 4.3 grains (900 – 1000 ft/p/sec)

Maximum load: 4.8 grains (1000 – 1100 Ft/p/sec).

Bullet weight: 165-170 grains.

Start load: 4.2 grains (850 – 925 ft/p/sec)

Maximum load: 4.6 grains (950 – 1050 Ft/p/sec).

Bullet weight: 180 grains.

Start load: 4.0 grains (825 – 875 ft/p/sec)

Maximum load: 4.5 grains (900 – 950 Ft/p/sec).

Bullet weight: 200 grains.

Start load: 3.7 grains (800 – 850 ft/p/sec)

Maximum load: 4.1 grains (875 – 920 Ft/p/sec).

Edited October 3, 2014 by zzt

[dauntedfuture]

I use solo in 9mm minor and .40 major. There is quite a bit of lot to lot varation. I went up .4g from last batch to current batch in 9mm.