sheepdog566 Posted July 11, 2014 Share Posted July 11, 2014 I have a gen 4 35 in which I replaced the factory recoil spring with a reducer ring, tungston guide rod, and 15 pound spring. When I shoot one handed, either strong or support hand I have malfunctions, usually fail to feed. I have to death grip the gun to get it to feed. When I put my factory recoil spring/guide rod back in everything works fine. Anyone else experience this? Link to comment Share on other sites More sharing options...
gdawgs56 Posted July 11, 2014 Share Posted July 11, 2014 Do you know what # the stock recoil spring is? -Jason Link to comment Share on other sites More sharing options...
HOGRIDER Posted July 12, 2014 Share Posted July 12, 2014 Have previously used a G34G4 factory spring in G35G4 with reduced power loads for GSSF, and it functioned perfectly. Link to comment Share on other sites More sharing options...
ron169 Posted July 12, 2014 Share Posted July 12, 2014 Had a similar thing happen to me at this past weekend match, glock 35 gen4, with a Jager steel rod designed for the gen 4, so no reducer ring needed. Would up with 4 different jams during the course of fire. Almost certain that it was the recoil spring since it was my first match with it installed. Would figure that the problem didn't appear during practice Link to comment Share on other sites More sharing options...
sheepdog566 Posted July 12, 2014 Author Share Posted July 12, 2014 Mine only malfunctions when shooting one handed. If my grip is not solid as a rock it short strokes. When I put my factory guide rod back in I can shoot one handed with no malfunctions no matter how I grip the gun. Link to comment Share on other sites More sharing options...
Brooke Posted July 12, 2014 Share Posted July 12, 2014 Mine only malfunctions when shooting one handed. If my grip is not solid as a rock it short strokes. When I put my factory guide rod back in I can shoot one handed with no malfunctions no matter how I grip the gun. I guess the trial and error switching of parts frequently leads to negative responses. Many mechanical design parameters require the optimization of properties that are on opposite ends of the same stick. When the aftermarket claims to improve a certain property, you should ask them if there is an equal and opposite negative response in another property. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now