jstagn Posted May 19, 2014 Share Posted May 19, 2014 After my new para was broke-in (1k+ rounds), I replaced the stock recoil spring with a Wilson 12lb. Recoil was less and gun shot perfect for over 2k rounds. Last time I shot put 1 full mag 16-17 rounds shot great, reloaded and shot 3-5 times (don't remember) and gun failed to go into full battery. Dropped mag inserted new same problem. cleared gun put in another mag still failed to go into full battery. Stopped shooting cleared gun, worked slide (empty gun) looked down barrel could not see anything. Loaded gun shot over 100 rounds all OK. Ammo was all chambered check even shot some of offending ammo, no problem. Another shooter suggested that a 12lb. spring was a little on the weak side for a 2011 45acp. Any thoughts???i Link to comment Share on other sites More sharing options...
kmca Posted May 19, 2014 Share Posted May 19, 2014 It depends on the load you're using and the configuration of your gun. How far is your gun ejecting the empties? Link to comment Share on other sites More sharing options...
jstagn Posted May 19, 2014 Author Share Posted May 19, 2014 At least 6 feet, using 230gr xtreme pf165-170 uspsa. Link to comment Share on other sites More sharing options...
kmca Posted May 19, 2014 Share Posted May 19, 2014 I know it's a rough estimate of recoil spring strength, but I like my brass to land about 4 to 6 feet, some say 6 to 8 feet. 12# sounds a little light, I'd try a 14#. The hesitation you're feeling is probably the barrel locking up (like it's supposed to do). Once you get those locking lugs a little more worn in, you can probably go back to a lighter spring. Link to comment Share on other sites More sharing options...
jstagn Posted May 19, 2014 Author Share Posted May 19, 2014 Thanks, its not a hesitation it was not even close to locking, At least a 1/16" + short of locking up. But I will try a 13 or 14. When I looked at the Wilson package that the 12lb. came in, it said to replace every 2k rounds mine probably had 3k. Link to comment Share on other sites More sharing options...
ParaGunner Posted May 20, 2014 Share Posted May 20, 2014 I always used a 14lbs recoil spring in my P14. Link to comment Share on other sites More sharing options...
jstagn Posted May 20, 2014 Author Share Posted May 20, 2014 ParaGunner, what brand and how often do you change? Thanks.... Link to comment Share on other sites More sharing options...
ParaGunner Posted May 20, 2014 Share Posted May 20, 2014 I like Sprinco recoil springs. I normally replace it once a year or around every 10,000 rounds, which ever comes first. Link to comment Share on other sites More sharing options...
Jeff Matzka Posted May 21, 2014 Share Posted May 21, 2014 (edited) Another shooter suggested that a 12lb. spring was a little on the weak side for a 2011 45acp. FWIW, I've been using either 11 or 12 lb. springs in my 14-45 since 2001. I put a couple thousand rounds a year through it, I've only had a handful of failures to go into battery - maybe 4 in all, and I can trace all of those to excess bullet lube on the case (lead bullets). Haven't had any jacketed bullets fail to lock up. I'm not saying it's your ammo, just saying a 12 lb. spring ought to do the job nicely. Something else is likely coming into play. Edited May 21, 2014 by Jeff Matzka Link to comment Share on other sites More sharing options...
jstagn Posted May 22, 2014 Author Share Posted May 22, 2014 Jeff, you are 1000% correct. When I took the gun apart the barrel bushing had a hairline crack in it. Just to be on the safe side a put a 13 wolf progressive and a new Wilson bushing to see how it fires tomorrow........ How often do you change your 11/12 lb spring (round count)? PS. I use xtreme 230gr plated bullets, no lead. THANKS to all......Joe Link to comment Share on other sites More sharing options...
ParaGunner Posted May 23, 2014 Share Posted May 23, 2014 Is your recoil spring stacking? If it is, it could of caused your cracked bushing. Link to comment Share on other sites More sharing options...
jstagn Posted May 24, 2014 Author Share Posted May 24, 2014 No stacking, just another cheap para part. Link to comment Share on other sites More sharing options...
Jeff Matzka Posted May 25, 2014 Share Posted May 25, 2014 How often do you change your 11/12 lb spring (round count)? PS. I use xtreme 230gr plated bullets, no lead. Joe, I don't really keep an accurate round count for spring replacement. I usually do it every year to year and a half. I'm guessing there's probably around 3000 to 4000 rounds in that time between practice and matches, as I'm not an extremely active shooter. I've never really had one get worn to the point where I could tell a difference in performance. I just replace them when I feel like it's time. I use mostly 200 gr LSWC's, but sometimes 230 gr FMJ's, and occasionally 250 gr. LSWC's. I really like the way the heavier bullets feel recoil-wise, but I tend to stick to the 200 gr. because they seem to shoot flatter - which can make a huge difference on the occasional long (35 yd) popper. Link to comment Share on other sites More sharing options...
jstagn Posted May 25, 2014 Author Share Posted May 25, 2014 Thanks to all who responded. Gun is back up and running great, . Link to comment Share on other sites More sharing options...
jcc7x7 Posted June 23, 2014 Share Posted June 23, 2014 15lbs or 16.5 at most for my guns and 177 Power Factor loads (includes a SIG STX) Link to comment Share on other sites More sharing options...
ihocky2 Posted June 30, 2014 Share Posted June 30, 2014 12.5# ISMI in my fairly new P14.45, less than 1000 rounds so far at 170PF. With factory spring it was closing too early and 1 or 2 out of every 100 would catch between the hood and the breech face. They would all get kicked out, but cause a feeding failure and the brass would have a nice gouge in it. I tried a 14# and had the same problem, but less often. 12.5# and it has gone away. Once everything wears and smooths out the 14# may be okay, but I can get faster splits with the 12.5#. I still have to check the ejector though, that may have been part of the problem. Link to comment Share on other sites More sharing options...
jcc7x7 Posted July 9, 2014 Share Posted July 9, 2014 (edited) Lighter the spring the more often it should be changed Edited July 9, 2014 by jcc7x7 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now