jcl Posted February 16, 2014 Share Posted February 16, 2014 I bought a Caspian 38 super comp and I have a question about primers, I did some searching and I didn't see any info. I loaded the last of my brass with small rifle primers, but I am wondering if I could use small magnum pistol primers? If so would I need to change the amount of powder. Thanks Jim Link to comment Share on other sites More sharing options...
Sarge Posted February 16, 2014 Share Posted February 16, 2014 No. The biggest difference in the various primers is generally the cup hardness. Typically the SM will be marginally softer than SR primers but not by a whole lot. You will be fine. Some Open guys use SPP and some use SRP. Regular small pistol primers can allow primer flow and flatten severely in some Open loads. I say load them up and shoot them! Link to comment Share on other sites More sharing options...
Flatland Shooter Posted February 16, 2014 Share Posted February 16, 2014 Some also find that SRP's are a little too hard and result in poor sealing. I'm not sure what changed, if anything, but about 7 years ago I started having breach erosion with Winchester SRP. That may have been the time I finally stopped loading for 180 PF and started loading for 170 PF. Changed to SPP and no further problems. Bill Link to comment Share on other sites More sharing options...
67camaro Posted February 16, 2014 Share Posted February 16, 2014 Change of powder amount is probably not necessary just check with your chrony but as others have stated depending on your powder choice you may get excessive pressure signs when switching to SPP. Link to comment Share on other sites More sharing options...
jcl Posted February 16, 2014 Author Share Posted February 16, 2014 Ok, so no to magmun small pistol primers, thanks Sarge. As for the power factor would one of you guys happen to have a post tagged that explains how the power factor works with different primers? Thanks Link to comment Share on other sites More sharing options...
lcs Posted February 17, 2014 Share Posted February 17, 2014 Ok, so no to magmun small pistol primers, thanks Sarge. As for the power factor would one of you guys happen to have a post tagged that explains how the power factor works with different primers? Thanks Different primers are not going to affect PF enough to worry about. Your not going to load to exactly 165 anyway. Powder has the greatest affect on PF. Most USPSA open shooters use SRP. I have used SRP for 6 years and 99% we're WInchester. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now