Two 650s with one Case Feeder?

[Charles Appel]

I currently have a 550 and an 650. The 650 is set up for .45 ACP with a caliber conversion for .45 Auto Rim. I am considering adding a second 650 for .38 Special. I was wondering if is practical to swap the case feeder/collator back and forth between two machines.

[Sarge]

Do a search. Somebody actually has a single case feeder set up to swivel between two 650's.

[Charles Appel]

Do a search. Somebody actually has a single case feeder set up to swivel between two 650's.

Cool idea. Probably beyond my mechanical skills. I'll do a search. Thanks.

[Henny]

It works fine for me. The reason I did it this way instead of just moving the feeder from one machine to another is the cupboard above the machines does not give me enough clearance to take the feeder off easily.

[GR8GIFT]

I share a case feeder with my 2 650's one set for 38 special and one for .45 ACP with no problems. You shouldn't have any problems.

[ScottyPotty]

I share too.

Edited December 29, 2013 by ScottyPotty

[Charles Appel]

Thanks to everyone for the info - especially the great pictures. Happy New Year to all.

[SD1]

Nice. ...Scotty and Henny

[jmorris]

I always just put them on the other post, I like te swivel idea. FWIW if you switch box tube for the last few inches of round and clock it right before you weld it won't turn on you even without the button head cap screw inplace. They are moldedFTP receive 1" round and box tube.

Edited January 1, 2014 by jmorris