930 JM lubrication?

[BobS761]

Any tips for lubing the JM Pro? Where wet and where dry? Typically I oil up everything then wipe it mostly dry. I do think I'm going to try a synthetic oil blend though.

Thanks!

[JesseCJC]

I use machine gun lube on the bolt assembly, carrier and a smear on the inside of the rail on the reciever where the carrier slides. Lightly lube the piston rings and the follower. That's it. Don't need it to be AR BCG dripping wet. Frog lube works ok but the machine gun lube doesn't gum up or cook off as fast

[Griz]

I could be wrong, but I think you are better off not lubing the piston at all, from what I have read, lube just makes it foul faster. I run mine dry and it runs 100% YMMV

[Robbie]

I lube my piston rings and the bolt carrier and places where there is wear marks. I use Frog Lube and have never had a problem. My 930 JM runs like a champ!

[Thecelt]

I wipe everything with clp, all moving parts. Although this is my first sasg so I still have to learn what it likes. I run everything wet but not excessively.