jmorris Posted October 3, 2012 Share Posted October 3, 2012 Someone asked about the new bench I was working on for my reloading room. Didn't find the thread with a quick search so here you go. It is 3/4" box tube that makes up a 5" truss making it quite strong an still light enough I won't mess up the wood floor. The adjustable padded feet also help out. Couldn't fit all of the most used equipment on at one time so there is a bottom shelf to hold them and an air compressor a friend gave me. It came out of a dentist office so it puts out quite a bit of air and is super quite. Still needs finish work and paint but you can get the concept. Link to comment Share on other sites More sharing options...
Jonathan Taliani Posted October 3, 2012 Share Posted October 3, 2012 Nice handiwork as always!!! Link to comment Share on other sites More sharing options...
carbonman556 Posted October 5, 2012 Share Posted October 5, 2012 That looks very sturdy!!! Nice work.... Link to comment Share on other sites More sharing options...
jmorris Posted October 6, 2012 Author Share Posted October 6, 2012 (edited) A few questions about the compressor. Its a jun-air unit that is 230 volt and took a step up transformer to 230v so its ran from 110v. Takes 62 seconds to fill the 5 liter tank from empty to 140 psi and 6 seconds to recover from 125 psi to 140 when you use it. It has a regulator for output pressure from zero to full pressure and the tank drain be adjusted for time to turn on from "off" to 22.5 min of run time. The transformer is the gray "box" at the top left of the 2nd photo. Edited October 7, 2012 by jmorris Link to comment Share on other sites More sharing options...
JGaltlives Posted October 6, 2012 Share Posted October 6, 2012 holy crap thats sweet Link to comment Share on other sites More sharing options...
SPRSkip Posted October 6, 2012 Share Posted October 6, 2012 is that a counter on the 1050? Link to comment Share on other sites More sharing options...
renzo808 Posted October 6, 2012 Share Posted October 6, 2012 That is beautiful! Not as cluttered as my bench and I only have 2 presses! Link to comment Share on other sites More sharing options...
jmorris Posted October 7, 2012 Author Share Posted October 7, 2012 is that a counter on the 1050? sort of. Its a computer controlled autodrive 1050. Click on this photo to see how it works. Link to comment Share on other sites More sharing options...
jmorris Posted October 10, 2012 Author Share Posted October 10, 2012 Added two outlets at one end and 3 quad boxes for everything. The two switches control the table. The one on the left is for the air compressor and the one on the right shuts everything else down. The paint wasn't my first choice but you have to give in to the gals every now and then, hammer tone brown. Should look OK once in the room. Link to comment Share on other sites More sharing options...
jmorris Posted October 10, 2012 Author Share Posted October 10, 2012 Oh, and painted the compressor too. Link to comment Share on other sites More sharing options...
norbs007 Posted October 10, 2012 Share Posted October 10, 2012 is that a counter on the 1050? sort of. Its a computer controlled autodrive 1050. Click on this photo to see how it works. Simply speechless... that is AWESOME! Link to comment Share on other sites More sharing options...
FAZZ Posted October 10, 2012 Share Posted October 10, 2012 I think there's room for one more Dillon, LOL. Nice bench. Link to comment Share on other sites More sharing options...
sardo67 Posted October 12, 2012 Share Posted October 12, 2012 what type of bullet feeder on the 1050 is that? Link to comment Share on other sites More sharing options...
Jonathan Taliani Posted October 12, 2012 Share Posted October 12, 2012 I believe that is a GSI Bullet Feeder. Link to comment Share on other sites More sharing options...
jmorris Posted October 19, 2012 Author Share Posted October 19, 2012 My baby's first birthday tomorrow and folks comming in so this is far as it went to "clean" up the install. Link to comment Share on other sites More sharing options...
raysracer Posted October 20, 2012 Share Posted October 20, 2012 My baby's first birthday tomorrow and folks comming in so this is far as it went to "clean" up the install. Awesome! Link to comment Share on other sites More sharing options...
doubleaay78 Posted October 30, 2012 Share Posted October 30, 2012 Very impressive! Well done sir! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now