randy01 Posted July 11, 2011 Share Posted July 11, 2011 Hi, When I just prime cases they seat nice deep in the primer pocket but when in ful operation with all stations full I get high primers. Anybody got a clue whats wrongly adjusted on my 1050? Grtz Randy Link to comment Share on other sites More sharing options...
Bigpops Posted July 11, 2011 Share Posted July 11, 2011 Hi, When I just prime cases they seat nice deep in the primer pocket but when in ful operation with all stations full I get high primers. Anybody got a clue whats wrongly adjusted on my 1050? Grtz Randy Is your shellplate tight? (no wobble/tilt) Link to comment Share on other sites More sharing options...
randy01 Posted July 11, 2011 Author Share Posted July 11, 2011 That was the first thing I thought myself but the shellplate doesn't move when I push it. It does however move when I size a case so it seems to be a little loose. If I fasten it more it doesn't rotate freely anymore. Link to comment Share on other sites More sharing options...
Canuck223 Posted July 11, 2011 Share Posted July 11, 2011 If your shellplate is snug but still moves freely, than adjust the height of the primer punch with the allen screw pin located in the tool head. By any chance were you using a different tool head when you were just priming? Link to comment Share on other sites More sharing options...
Bigpops Posted July 11, 2011 Share Posted July 11, 2011 and all of the dies are tight? Link to comment Share on other sites More sharing options...
DougCarden Posted July 11, 2011 Share Posted July 11, 2011 Make sure your shellplate is snug, not tight. Then check the toolhead and make sure it is tight. That is the two culprits that cause me problems... Good luck, DougC Link to comment Share on other sites More sharing options...
dillon Posted July 11, 2011 Share Posted July 11, 2011 Double-check your dies, it could be one is down too far, and prevents you from completely downstroking the machine when you have cases in all the stations. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now