Barrel Link

[Rolex]

I noticed the barrel link in my open gun is

starting to look like an egg on the top- when

the gun is in the closed position. Ant way the

link has NO number on it!

Any ideas-in side of sending to a smith??

[Powder Finger]

You should be able to measure the distance from the link pin hole to the surface of the bottom of the barrel feet.

should be some where around .278.

Then order maybe 3 (+ and -) from your figure.

[Powder Finger]

Forgot to add 1/2 slide stop diameter plus 1/2 link pin diameter

so .200/2 + .154/2 = .177 + your measurement.

[Jaxshooter]

Just send me that gun and order a new one.

[Powder Finger]

Just send me that gun and order a new one.

I want to know if that ever works. I may have to start increasing BB shooter inventory if so!

[Rolex]

Just send me that gun and order a new one.

Hi Chris- where have you been?

Now- as far as the gun- YOU have

enough that you can shoot a diff.

one every day of the week for a year,

and not shoot the same one twice!

[Powder Finger]

Just send me that gun and order a new one.

Hi Chris- where have you been?

Now- as far as the gun- YOU have

enough that you can shoot a diff.

one every day of the week for a year,

and not shoot the same one twice!

That answers that.