CQB Dave Posted February 11, 2004 Share Posted February 11, 2004 Man I should have been using this stuff years ago. I used Slide Glide both my Kimber Team Match and my Pro Carry hi cap and the results were unbelieveable. I will highly recommend this to eveyone I know. Link to comment Share on other sites More sharing options...
blkbrd Posted February 11, 2004 Share Posted February 11, 2004 Told you so. Link to comment Share on other sites More sharing options...
Jasonub Posted February 11, 2004 Share Posted February 11, 2004 your preaching to the preachers. Glad you love what we all have been loving for years Link to comment Share on other sites More sharing options...
tyro Posted February 12, 2004 Share Posted February 12, 2004 Dave, I've been thinking of trying SG myself, What weight or number SG did you use? Thanks, tyro Link to comment Share on other sites More sharing options...
CQB Dave Posted February 12, 2004 Author Share Posted February 12, 2004 I used the lite version. It worked really good. Link to comment Share on other sites More sharing options...
Allen Posted February 24, 2004 Share Posted February 24, 2004 Brian may include instructions in the jar I ordered Monday, but if not, how much do you put on the slide rails? Do you cover the entire contact area, or just the ends and let it work it's way in? Thanks, Allen Link to comment Share on other sites More sharing options...
kimel Posted February 25, 2004 Share Posted February 25, 2004 Just glop it in there. I do the slide rails both top and bottom. This tends to ooze out a bit but so what. I just wipe it off and back into the jar it goes. You don't have to fill up the grooves in the slide, just put a nice coating on it. Don't forget the locking lugs, bushing, guide rod, etc. Link to comment Share on other sites More sharing options...
bountyhunter Posted February 27, 2004 Share Posted February 27, 2004 Go to a model store or hobby shop and get a small paint brush. SG has so much surface tension you can just put on a dab and then spread it out and leave a thin sheen on the surface. The small brush is very cool because it makes it so easy to do the rails and rail grooves because it fits right into the groove. You don't waste any lube because you can spread it evenly. Link to comment Share on other sites More sharing options...
bountyhunter Posted February 27, 2004 Share Posted February 27, 2004 Do you cover the entire contact area, or just the ends and let it work it's way in?Thanks, Allen I usually put a good layer on the barrel lugs and feet which get a lot of pressure, and I also spread a thin sheen over the whole barrel because it makes cleaning easier (you just wipe it off). I put it every where except the breech face and feed ramp. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now