czrunner Posted August 6, 2010 Share Posted August 6, 2010 anyone happen to know how far BBI is running behind on orders right now? I ordered some PD's and BBI's on the same day and have had the PD's for a little over a week now. Just curious We try and keep our turnaround time posted on our website and we have our front page listed at about 10 days behind. Appreciate everyones huge support and understanding. We hope to get caught up at the end next week! Normal turn around after we get caught up is about 2-3 days from order to shipping. Again thanks for the business and support! Happy shooting, Tony Caspers BBI Link to comment Share on other sites More sharing options...
PBA2 Posted August 6, 2010 Share Posted August 6, 2010 anyone happen to know how far BBI is running behind on orders right now? I ordered some PD's and BBI's on the same day and have had the PD's for a little over a week now. Just curious We try and keep our turnaround time posted on our website and we have our front page listed at about 10 days behind. Appreciate everyones huge support and understanding. We hope to get caught up at the end next week! Normal turn around after we get caught up is about 2-3 days from order to shipping. Again thanks for the business and support! Happy shooting, Tony Caspers BBI Great! thanks for the quick response! Should be anytime now then, I've been looking forward to trying these. If you are using Glock is it your understanding that most are having more luck with aftermarket barrels in terms of accuracy? Link to comment Share on other sites More sharing options...
czrunner Posted August 6, 2010 Share Posted August 6, 2010 anyone happen to know how far BBI is running behind on orders right now? I ordered some PD's and BBI's on the same day and have had the PD's for a little over a week now. Just curious We try and keep our turnaround time posted on our website and we have our front page listed at about 10 days behind. Appreciate everyones huge support and understanding. We hope to get caught up at the end next week! Normal turn around after we get caught up is about 2-3 days from order to shipping. Again thanks for the business and support! Happy shooting, Tony Caspers BBI Great! thanks for the quick response! Should be anytime now then, I've been looking forward to trying these. If you are using Glock is it your understanding that most are having more luck with aftermarket barrels in terms of accuracy? I run a factory Glock 34 barrel and have no problems using the 9mm/130 Grain with Solo 1000. (Except having a trigger pin break at the Pro-am... Some guys like to use aftermarket barrels with out polygonal rifling. Most guys would suggest to use your factory barrel and see if it performs well for you before spending money on a after market barrel. Most glocks have no issues...but every so offen one will throw a fit. Link to comment Share on other sites More sharing options...
PBA2 Posted August 6, 2010 Share Posted August 6, 2010 hopefully my experience will mirror yours, I'm using the G34 as well. but I'm going to try the N320 with them. Link to comment Share on other sites More sharing options...
MoNsTeR Posted August 6, 2010 Share Posted August 6, 2010 I use 'em in a G34 factory barrel with no problems (with N310, FWIW). Link to comment Share on other sites More sharing options...
Grumpy Finn Posted August 7, 2010 Share Posted August 7, 2010 (edited) I use 'em in a G34 factory barrel with no problems (with N310, FWIW). Please, Do Tell (N310). I'm still at 125 fmj. Edited August 7, 2010 by Grumpy Finn Link to comment Share on other sites More sharing options...
njl Posted October 10, 2010 Share Posted October 10, 2010 I recently ordered 1k of these, and shot 30 of them today. I loaded with 3.8 and 3.9gr Universal Clays, and was getting around 1000fps (don't have my log book in front of me). I loaded them to about 1.154, which looked like it'd be ok comparing them to my MG 124gr JHP loads. The smoke was terrible. If I'm going to load more of these, I've got to find a less smoky powder for them. Recommendations (preferably with load data)? Link to comment Share on other sites More sharing options...
ghertz Posted October 10, 2010 Share Posted October 10, 2010 Check out my data from awhile back BBI chrono data Link to comment Share on other sites More sharing options...
MoNsTeR Posted October 11, 2010 Share Posted October 11, 2010 I use 'em in a G34 factory barrel with no problems (with N310, FWIW). Please, Do Tell (N310). I'm still at 125 fmj. 3.3gr, 1.145+ oal, gives me 135ish PF Obviously you would want to work up to that carefully in your gun... Link to comment Share on other sites More sharing options...
njl Posted October 12, 2010 Share Posted October 12, 2010 Nobody around here sells Vihtavuori powders. After some more googling, I'm thinking about trying 4.5gr of WST. I was pretty happy with it in .45 for being low smoke with lead base FMJs. Link to comment Share on other sites More sharing options...
njl Posted October 18, 2010 Share Posted October 18, 2010 Here's what I shot today. 130gr BBI 1.140" OAL 4gr WST 994.0-1054fps 1021avg 60.08ES 20.19SD 4.2gr WST 1004-1053fps 1031avg 49.51ES 15.45D 4.4gr WST 1000-1053fps 1033avg 52.43ES 16.06SD The first few I loaded (with Universal) must have been just long enough to touch the rifling...because they won't quite drop in and out of the barrel...but the slide will close all the way on them. For this batch, I shortened the OAL and used a G19 barrel as a gage to make sure they'd drop in / drop out. There was still some smoke, not quite as noxious, and I got lucky and the breeze was in the opposite direction as last time, so my smoke was blowing down range. I cleaned the barrel before and after shooting the BBIs, and I'm not real happy about the amount of residue they leave (Glock 17, factory barrel). I'll probably hold onto the remaning 900+ of them and only use them for targets/ranges where jacketed ammo isn't permitted. Montana Gold's are just easier to load, cleaner shooting, and only a little more $. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now