yigal
-
Posts
2,167 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by yigal
-
-
u will prevent impact between metal that increase slide service life . i use buffers on 9mm.
f=mv/dt
buffer increases contact time between 2 metals .that decrease impact forces on slide and frame.
read on this forum that big names advised remove buffer because it make problems.
if u have time read this -cz ts .40 shot 90 k and still alive.
http://www.strictlyipsc.com/gear.htm
-
i use buffers last 30 years on this guns
cz 75
j941
tan.limited custom
cz tso - designed work with buffer
i cut them from 16mm dia. poleuritan bar.
if u change them before they breaks all o.k.
-
On 12/1/2015 at 7:09 PM, Twinkie said:
My experience has been that the Tanfoglio springs are uniformly heavier (thicker wire & more coils) than CZ springs.
+1
On 12/5/2015 at 5:39 AM, Nealio said:What you want is to get more positive sear engagement on the hammer hooks. I don't know if this is beyond your skill set it not but increasing the forward angle of the face of the sear will give you a harder SA trigger pull and not effect your DA pull.
So if you are looking at the sear in the gun you would reshape the face on the blade of the sear so it angles very slightly back from the bottom to the top.
+1
just try find regular sear. it has more negative angle.
On 12/5/2015 at 10:13 AM, mrd said:Nealio, that would be good to know how to do. Is this possible to do with a hand file?
nooooooooooooooooooooo!
-
Glock porn
in Glock
-
is it's legal for production?
-
37 minutes ago, johnbu said:
Obviously, @MemphisMechanic is a pro at the empty chamber "Israeli Start" and can draw and rack quick as a blink! Lol.
Hmmm, while a joke, is that even legal? I would think so... but never concidered it.
at least they also contributed something to ipsc
-
On 10/12/2017 at 8:58 AM, DenverDave said:
When I am wrong....I am willing to Man Up on it.
THERE IS NOTHING WRONG WITH THIS GUN.
don't worry he will forgive u.
-
not only u lucky
in ours club ~50 cz shadow and tso 9mm. (5-sh 2) in all of them buffers. no problems !
it hold ~4-6k before change , because we use only factory ammo 135pf.-140
-
find 1mm fiber optic rod for s2 front sight and install it properly.
i would not replace factory sights because they are stronger than any adjustable sights that i know.( for 9mm)
-
-
15 hours ago, hitman_usmc said:
Update: I sent the sight back to Leupold a few weeks ago. I got it back last night and shot it on the same gun today. No issues with zeroing. The return form said they replaced the glass and checked internals. Glad I wasn't crazy and that Leupold made it right.
even leupold has problems with mondays
nobody is perfect.
-
for major loads or minor?
i used for minor tasco pdp -2 from 1992 still works.
-
1 minute ago, selecw said:
Both the Guga Ribas and Suomi ASE holsters create wear on the sides and underside of the trigger guard, and on the underside of the frame. They do this on my TS, TSO and Czechmate, all of which I dry fire a lot. It doesn't bother me as the guns are competition tools.
thank . didn't new this.
it's not pleasant that holsters make damage to gun finish.
one of my friends use same holster 25 years without any scratch on the gun.
when i designed my h . first thing that i want that finish will not damaged.
-
i know that and i know where they bay it from.
but at least they pass qc in tan. and i know that they use very good type of steel.
-
13 hours ago, robert.a.brewer. said:
Yigal,
Which holster would you recommend?spoke today with friend that tried ALL types of holsters (he receive them for free)
he said that g. rivas considered now as the best brand. he will try it next month.
-
23 minutes ago, johnbu said:
Exactly right!
At least tanfos respond well to the work.
I just wish they would sharpen the cutting tools more frequently...
sharpen cutting tools its over 45 min.
i can send u pic. of my tso barrel chamber that have all marks that they "finish" it with broken mill.
-
39 minutes ago, Avenida said:
this should be covered under warranty. It is a factory defect due to poor fitting.
At least, here in Canada, for much less I know people that have had the upper replaced.
good service in canada.
for much less in russia 15 years ago people were executed
-
1 hour ago, MemphisMechanic said:
There. Fixed it for accuracy.
There’s a reason we pour over our guns and meticulously tweak and polish them. Because factories just stamp them out like cars toasters and everything else.
thank u.
it's correct.
i can say it in a positive way:
if my first handgun that i bought had been working well properly i would not had understood anything.
-
38 minutes ago, 858 said:
It calls into question your "All shooters" comment because after a thousand draws I don't have finish wear. It's true the TSO isn't as easy to fit as other platforms but the DAA Racemaster and Alpha-X both work fine.
yes u are wright i mean in ours local shooting club we have 10 tso. all have finish wear on trigger guard
its about the model with aluminium frame with plastic insert that close to al. frame
in simple model that i saw without al. frame didn't heard complains only about that gun to much free .
and tso and most cz have not easy platform as u say but there is solution for them too. and it more simple than u think. tso much simple platform than shadow.
that is the reason that cz changed trigger guard in sh2 ?
-
Just now, 858 said:
The holster was made to use the support. It's like buying shoes and then complaining they're loose when you don't use the laces.
that's ok
-
12 minutes ago, 858 said:
Once I added a muzzle support my DAA Alpha-X works pretty great. No wear, rattling, or stuck gun.
if i bay shoes i don't expect add stabilizers on them for walking
that is the reason that i don't like be depended on anyone .
-
54 minutes ago, robert.a.brewer. said:
Yigal,
Which holster would you recommend?sorry i can't recommend any type of holster because i never try others. everything that i use i do it myself .and i don't copy from others. i use my design open h. from 1992. only trigger guard covered and delrin pin support barrel.
that was approved by Nick Aleksakos and ipsc committee in 1992 for use in ipsc competition.
and i fishing and shoot compound bow .
-
if that's how they work there in tan. then it's sad.
a friend that visited cz factory after the tour in assembly department sold his new cz
-
51 minutes ago, bemanuel said:
I use a double alpha race master. They have a tso specific insert. Noticing some wear on bottom of trigger guard.
all shooters that use daa holsters damaged tso and shadow trigger guard finish. and gun has big ply inside holster.
not mention about that every competition few locked guns falls from it. and few stacked inside the holster.
bad copy.
never try no sr speed no daa and not ghost
herd good things about g .rivas but never saw it.
Increase trigger weight, Stock 2
in Tanfoglio (EAA / IFG)
Posted
thank u.
not i didn't
i have old and the newest parts from tan. but not from us market.
but this from today.