R.Elliott
-
Posts
471 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by R.Elliott
-
-
2.9 gr Hodgedon Clays
147 gr Blue Bullet (usually comes in @149 to 152 gr)
1.090" oal
.378" crimp
Makes about 130 pf in my Sigs.
-
3.0 gr. Clays under 147 gr. Blue Bullet @ 1.130 oal. 131 pf in both of my Sigs and they group pretty well for me.
-
I just use a mag brush or a silicon rag. I'll try and take a picture when I get home.
-
Canadian here.
1/16th X 3/4 inch aluminum stock pop riveted with alum rivets.
-
Lupo the butcher.
-
Nike Alpha football cleats work pretty well.
-
I replace the screws with 4/40 socket head cap screws. That way you can use a larger hex wrench to cinch them down without stripping. Blue locktight if you want. I haven't lost any screws in years since I started doing this.
-
The grip will fit in the ghost, no problem.
Cr Speed is also a good choice.
-
Surface prep with acetone or brake cleaner (non chlorinated) heat the grip and the tape, run a bead of super glue gel along the underside of the edge of the tape.
-
-
I also opted for multifocal lens implant. Technis Symfony.
I had them done last September and it's just fantastic. I see better now than I did when I was 20. 57 now.
No more glasses.
-
I experimented with it in 38 Supercomp.
It took 13.6 grains to make 169 major with a 124 grain bullet, and extreme spreads on the velocity were a little too wide for me. Also, it burns very hot and started eroding titanium comp baffles very quickly.
On the up side: an absolutely stupendous amount of gas to run the comp, so it shot very flat and soft.
Also a nuclear fireball and concussive noise.
-
15 hours ago, racer-x said:
You can also have C-More put a new 8MOA circuit board in there for you for a lot less.
I had them do that for me last year and it was $69.
Very good to know. I may do that end of season.
-
Follow up:
Finally had a day with some sunshine here and took it out for a try. The diode cleaning thing did the trick. Very visible now.
I do like the look of that 8" dot though. Hmm, do I want to dump another 600 bucks?
On 2018-03-19 at 4:11 PM, mscott said:You might need to get the electronics cleaning Qtips that have a small micro head to reach all the way down. I couldn’t clean my diode with regular Q-tips, but the ones with the tiny heads work perfectly. I got them from Amazon. I use alcohol as a
-
Have a look at Randolph Engineering, Ranger Edge frames. Best shooting glasses I've ever had. Really well made.
-
Ok I managed to get in there with an alcohol soaked patch on the end of a small allen key. It seems better under bright indoor lights. Outside this weekend will confirm it.
Thanks for the assist.
-
Great info gentlemen, thank you.
So I've checked the battery route and even brand new Duracell are still dim. It's possible there may be a dust buildup on the diode. Hadn't thought of that. I will try to clean them and see what happens. Seems to me that last fall when these were installed they were brighter.
Interestingly, I've gone through five regular cmores to get two that were decently bright. There does seem tbe a wide variance between supposedly identical parts/mudules. I should take a look at the Sig Romeo. At least I wouldn't have to dump more mo wt on a mount.
-
I need to tap the collective hive mind on this. Can't find what I need in the search function.
I have a 6" RTS2 on each of my open guns, recently converted to 9 major. They work great and provide a nice clean ejection path. Problem is that in bright sunlight they are just too dim, probably half as bright as my old 8" C-mores. This is very disappointing since I really like the compactness and the controls, and they were pretty expensive and not easy to replace (Canada). Of course I can switch them back to the old C-more but then I will have to deal with a narrower ejection path and the inherent problems therein.
Is there another, brighter reflex sight that would fit the same scope mount or does anyone know if these things can be made brighter?
Thanks all.
R
-
Liquid grip. I discovered this stuff a couple years ago and it's hands down (see what I did there?) the best product going IMHO.
-
Almost 9 bucks for us Canadians. It's brutal.
I switched both of open guns to 9 major and couldn't be happier.
Also, cfe is less than half the cost per round from the 3n38 loads I was using in supercomp.
-
Extractor clean?
-
40 minutes ago, Foxbat said:
The data is actually very simple: 4000 38SC cases left at the matches is $600 a year.
Same number of 9mm cases is $40.
Yes, data IS great, if presented honestly.
It's more like a thousand bucks for 4k SC brass up here (Ontario). That kind of forced my hand.
-
I don't know, I've never considered that as a possible cause. On a regular working day though, I don't think I'm drinking as much as that.
-
I'm a chronic insomniac. Have been most of my life but it does get worse, or just harder to deal with as I get older. Left to my own devices the best I can manage is micro-sleep for only a few seconds at a time. So I have a prescription that mostly works unless I'm super-amped up and then I won't even notice it.
Strategies for me if I know it's going to be a crappy night:
Accept it. No point worrying about it now. Now it's too late.
Try to eat well and clean and not to late.
Rest for a while if you can't sleep. Take your mind somewhere, she a problem, anything to not think about sleeping
Gravol
Competition shoes -which ones?
in Physical Training
Posted
Nike Alpha Menace Sharks. Football cleats.
Super comfortable, available in wide sizes, cheap as hell and traction like a bulldozer.