NWfront
-
Posts
211 -
Joined
Content Type
Forums
Profiles
Events
Store
Posts posted by NWfront
-
-
Since the short test session I have only shot a 150rnd club match. I started to feel what I thought was grit in the break but by the end of the match it smoothed out. I remember him mentioning in one of his videos to give it a few hundred rounds to wear in.
Performance wise it's impressive. Travel is super short and pulls light while running the 4.5lb striker.
-
2 hours ago, lumberjack149 said:
Yes, I've had this same experience
ISMI or Wolff?
I ended up going with a 15lb Wolff paired with a 4.5lb striker spring.
-
Anyone else noticing a need to run a slightly heavier spring in the Gen 5 to get the same results? I think the new longer guide rod is reducing a bit of spring preload.
-
I received my comp kit today and was able to get in a quick trip to the range. Very impressive with no adjustment needed. I'm still undecided on the break and think I will need to put a few hundred more rounds through it to really get a feel for it. I can say the pre/over travel and reset are the shortest I've seen and all the safeties are working.
-
The Jager rod for the G17 Gen 5 also fits the 34.
-
Dillon seating die? If so I found you will get the ring those and some other plated bullets. I never found it to effect accuracy. Despite that it always did bother me so I have since switched to a Lee die.
-
So far so good. My trigger is already on it's way.
-
I'm curious what you think as well. After talking to him for a few minutes today I ordered his competition kit for my 34 Gen 5.
-
I previously ran a 13lb ISMI and now a 14lb Wolff in my 17&34.
-
I prefer 147's and just about everyone I know does as well in their Glocks. I've always had good luck with Titegroup (3.0 coated & 3.2 plated) and 147's rn or hp around 1.140". Do a search and you should find plenty of info.
-
Glock Gen 5
in Glock
3 hours ago, hlpressley said:I think that’s what comes on the 34 from the factory. Seem to need a bit more than it provides.
Both my Gen 4&5 had the standard (7534) release installed from the factory. The extended is only a +.75mm difference with a bit larger radius on the corner.
The Vickers release is nice as well.
-
Glock Gen 5
in Glock
I upgraded mine to a factory extended (08794). It's a small increase but seems to do the trick.
-
I sent an email asking about that and was told it does not include the Gen 5 MOS.
-
The Gen 5 .270 heavy guide rod works great in both the 17&34.
-
I have tried a few different base pads and prefer the +.200 Dawson's. Most others are nice as well but hard to beat Dawson's price/free shipping.
-
Glock Gen 5
in Glock
The magwell isn't a huge difference but definitely an improvement especially once you get a grip plug in.
As for accuracy I never had any issues with the previous gens. As an update in that department my new Dawson Gen 5 specific sights have me shooting POA/POI.
-
Glock Gen 5
in Glock
I just picked up my G5 17 last weekend and other than the stock plastic sights having me hitting low I'm very happy with it.
I typically like the dot connector but in this gun I threw in a polished minus connector and found I prefer that. I tried a 4lb striker spring and it wouldn't reset the trigger safety and the 4.5lb would just barely. I may order a 5lb and a plunger spring to try but for now I'm happy with polished OEM parts and springs.
-
I previously ran Arredondo 's and currently use TTI. Both work great but I preferred my old Arredondo pads.
-
You should be able to easily accomplish that with a little polish and a lighten striker spring. If that's not enough Taran Tactical is now offering their GM 3.25 kit for the Gen 5.
-
Sorry, just got a few pics sent to me and thought I'd share. Looks like it won't be long now though.
-
I received a preview today. I've since sold my S2 but this is exactly what I had in mind for a set of grips.
-
On 6/25/2017 at 6:48 AM, PaulW said:
How has this mount held up? Does this design allow the plate to fit flat to the top of the slide without a gap?
-
He talks about his setup on one of the more recent American Warrior podcasts. It's a great interview with all sorts of good info.
-
That's what I ended up getting myself and it definitely help keep things solid. If you don't already have one I recommend the Boss hanger as well.
Guide rod for Gen 5 34.
in Glock
Posted
I picked up another rod for my 17 but this time I went with the ISMI spring to compare. I found I could still run a 13lb but the 15lb felt better. Most of my other Glocks use ISMI so I will stick with those but either spring seems to work well in 15lb with my Gen 5's.