WmKerle

180Gr Blue over 4.2Gr of E3 at 1.180 gives me 170PF out of my RIA Pro Match .40

Yes I have a Nitro fin on my Pro match .40 and use it in USPSA limited class. The gun runs like a top.

@ tomjerry1 The pic that SCTaylor posted is what I have on my Pro Match .40 .... To clear things up the grinding was on the Nitro Fin to make it fit and not on the gun it's self. The Nitro Fin is made longer something like an 1/8 " longer than stock this may be so you can fit it to your needs. As a side note the black is stainless steel under the coating

Yes I'm running a Nitro Fin on my Pro Match .40 Had to do some grinding on it to make it fit. I did set it up so the slide will not lock back on an empty magazine.

I have the Pro match 40... I load my 200Gr FMJTC rounds with E3 powder to 1.180 just what I like to use, I did try 40 rounds at 1.200 and they all ran in the gun just fine.

My XDM 5.25 9mm did that some times after I put the same kit in. What I found was that the recoil spring was to strong for the new trigger kit. It kept the slide just a fraction out of battery so when I pulled the trigger it made the slide jump forward first then the gun went off. I went to a 14LBS recoil spring and it fixed it.

I was told that they stop shipping them in over a year ago........ This is because hey do them in batches and are doing the 10mm ( This is just what I was told ) I got my Pro Match Ultra HC 40 from here on the classifieds. It is one of the best guns I use in limited. Out shoots my XDM 5.25 all day long.

I have a Guncrafter main spring housing on my 51738 Pro Match Ultra 40s&w..... so I'd say yes

I just picked up one of these from a member on here..... It runs like a sewing machine. I'm a big fan of the XDM 5.25 but this RIA Pro Match 40 is a winner. I load my .40's for this gun to a OAL of 1.180 and it just eats them up I have yet to have an FTF or FTE

I have a XDM 5.25 with a PRP Extreme Trigger kit and had a few light primer strikes..... The striker channel was in need of a good cleaning. Give the striker and the channel a good cleaning then after give the gun a test. Also do not lube the striker or the channel it's made to run dry all it will do is gum it up faster.