buford977

Which ones exactly are those ? Sent from my iPhone using Tapatalk

Does anyone know if this pistol comes with the slide cutouts. I find pics both ways ?? Sent from my iPhone using Tapatalk

Try AA #2 4.9 grains should be about right meters like water soft shooting Sent from my iPhone using Tapatalk

Yes I was using the FCD I loaded some to 1.1 and used the Dillon crimp die to the same .380. I just have to go shoot and test . I also ordered some of the Bayou's 147 they seem to have more of a taper to the bullet so I can seat them longer without jamming them into the lands.

Needing help on my 9mm loads I am shooting a H & S 147 FP coated measured at .356 3.2 g TG velocity 943 +/- Crimp diameter is .380 and oal= 1.068 which is just off the lands passes plunk and twist test Gun is a XDM 5.25 I have never slugged the barrel but cast coat and size to .356 120 TC and they shoot fine Any thoughts other than it just doesn't like the long heavy bullets? I should have plenty of vel. and was even going to drop .01 gr. to get it closer to 900 fps Any help would be appreciated!!!

Hello I have a new match pistol with probably 800-1000 rds through it and now its not wanting to extract every so often. The extractor is a bit loose and it looks like the spring has either broke or popped loose some how. I have tried to drift the pin out without any luck and don't want to get the BFH out. Any suggestions or hints ? I may end up calling eaa Monday and sending it in but I should be able to remove this part correct? Thanx all Brian