[CZ Tactical Sport with *thumb rest [generic]* and Extended Safety]

Did you get the extended safety recently? I've been waiting forever for CZC to get the extended ones in

[Stock 2 sighting]

There are 10 stock 2s on gunbroker for 949 plus 30 shipped

[Division Dilemma, HELP]

I'm in the same boat but when I dabble in limited its with a TS 40, while I shoot a Stock 2 in production. I do think I mess myself up a little when changing platforms. I shot a recent classifier match with these two guns and I definitely struggled a little during the first array of each stage re-adapting to the trigger and recoil impulse.

I've had a few people tell me that since I am a new shooter I should stick with production because I will learn more, whether that's true or not I have no idea.

[Lee Class Turret Auto-Index Problems]

Mine is giving me issues now. It used to index a little past where it should and now that I replaced the square plastic piece it will either go to far or not index all the way. I cleaned everything, lubed and polished, but its still not working right. Any ideas? Its 5 months old and has seen 1.5k rounds and I use the auto disc powder system.

I'm about to curb stomp it and get a 550 to go with my 650.

[WHERE IS ALL THE POWDER]

I think everyone dreams of living close to a major reloading supply dealer. It would save so much money.

[Why does the HAJO rear sight adjustment screw keep breaking?]

Almost sounds like the screw should be changed out once a year to make sure its good to go. Or maybe there's a replacement screw out there that's made of some better material that will fix the problem.

[Why does the HAJO rear sight adjustment screw keep breaking?]

How long does it last?

[9mm soft load]

165gr xtremes over 2.7 of TG at 1.148. 129pf in my shadow, zero pressure signs.

[IDPA belt - Wilderness, CR Speed EDC, or DAA inner belt?]

I ordered a shooters connection belt for my wife last night. I hope it's great bease they're ten bucks cheaper

[IDPA belt - Wilderness, CR Speed EDC, or DAA inner belt?]

I use option 3

[Are caliber changes on a 650 fast?]

I just don't know how someone could justify a complete new/different press because 10 minutes is to long for a caliber change. I find that the conversion kit and qc kit are expensive enough as is. But if someone can afford a 2nd or 3rd press more power to them I guess.

[Load data for new Stock II?]

I've been trying to fine the right recoil impulse myself. I like how 124s felt with an 8lb spring but I was having issues with feeding so I went back to the 9lb spring. I guess I'll just have to bump the load up a bit to get the feel I want. I didn't crono the load but was shooting 125 bbi 1.100 3.8tg.

[Stock 2 Front Sight]

Direct. Dawson ships way faster!

[Dawson FS screw stripped]

Use an easy out

[Reloading Bench Construction]

I just got a bench from harbor freight and the quick change inline fabricaton stand for my lee presses. Once I loaded the bottom shelf with bullets the table became very steady.

The best part is now that I'm in the house and not the hot shed, the wife will fill primer tubes and hundo case gauge/box the bullets for me. Why couldn't I have done this sooner.

[Extreme 165gr]

I've shot them in my mp , shadow, and stock 2. I load at 2.7gr 1.148 for a 133 pf

[Need a load for Titegroup and 147gr BBI 9mm for a Stock 2]

My stock ii is always hotter than my shadow. I thing the barrel is a tad tighter

[Howdy from Florida]

Welcome! I often try to shoot SEPSA in Fernandina beach and SAPSA in St Augustine which are two good matches right by you.

Thanks for your Service!!

[Stock 2 Wolff +5 mag springs to small?]

I ordered a 10 pack of the plus 5 spring they offer but it seems that the spring doesn't fit on the basepad side. I'm beginning to think these springs don't work with the LF magazines. Or maybe I'm supposed to bend the end of the spring to make it fit? Also the springs are shorter than the factory ones. I'm using factory mags with sp pads.

Can anyone confirm my suspicion?

[Which 9mm seat & crimp one-step die do you recommend?]

My lee bullet seater die seems to do the crimping all by itself. I can screw the adjustment stem all the way in and adjust at actual die for seating depth and it will still put a .373 crimp on the case. It pretty much makes my dedicated lee crimp die a waste. I was wanting a .378 crimp but due to my seater die crimping when I don't want it to I cant get my case that wide. Sometimes it will cause lead bullets to catch and cut on the brass.

[Cz Shadow not going to sa.]

broken sear spring maybe?

[CZ Custom Match Barrel]

Have any of yall fitted the barrel yourseleves? If so do you just use lapping compound and work the slide?

[Trigger return spring?]

I always grease mine up real well in hopes it helps reduce friction. I also try to change mine out every 6 months.

[Can someone weigh an SP base pad on a mag and a stock CZ 16 rd mag?]

My sp pads for my cz mecgar 17rd mags are 1.05oz

[Load data for new Stock II?]

SO it seems that most use 147 gr in their stock ii? This thread died and I know we have a lot more guys with stock ii's now.