vixty
-
Posts
704 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by vixty
-
-
Yeah I was so excited to put my grips on when I got them then that that "aaaaahhhhh man" moment. I started to open up the grip hole then realized hey I can just sand down the screws. So one of my grips has some tooling marks around the screw while the other looks perfect.
-
I use tg and it only took about 3k rounds before the thing was caked
-
Just know that the factory grip screws are to fat for the metal grips so order the ones from eric. or you have to take a dremel sanding drum to the screw head to reduce the diameter of the screws.
-
The eg grips have made the stock 2 feel the best for me. Originally I sanded down some plastic grips and put grip paper on them and they felt ok but the eg feel the best
-
1-1/2" spade bit and drill out where the nut on the handle is hitting....Ask me how I know this works...
Or use a belt sander
-
Get with Bruceg
-
-
I started to have angled up feed issues in my shadow so I pulled the extractor out and it was caked. Cleaned it up and the gun started running fine again.
-
If it happens again i think i will try to shave some material off the extractor to make it grab a little more and see if that helps.
-
Will do Dr. Phil
-
its funny that you mention brass as the issue becuase today my CZ TS was doing the same exact thing. However What i have noticed is its only happned when i used BBI loads in both guns. My S2 has never had the extraction issue when using xtreme bullets. Not sure how that would cause the issue unless somehow the shape of the BB's is catching on the extracting round.
-
sweet thanks!!!
-
I would assume the trigger guard since the rules specifically says no stippling on the trigger guard. He did say production gun so I hope the company that did the work didn't just put him out a ton of money.
-
its pending sale locally...sorry its listed for 110 with the auto disk and extra turret. Also lee is sending a new ratchet and the clamp that holds it
-
Is it possible on the 550 to use the powder through die and a funnel on top of the die. I prefer to measure out my 223 powder since varget doesn't do so well with the Dillon powder system and dump it in the case on the upstroke. Or is there some other die I can get that will allow me to place the powder funnel on top
thanks
-
I solved the problem by finding a 550 for sale locally for under 300
-
I took an emory wheel to my recoil rod and plunger because there were I guess "Machining rings" on them that cause friction on the springs. So once I got them nice and smooth I could tell a different in trigger pull and smoothness of the slide.
-
-
I measured all my feed lips and 5 were .355 and one was .360. I always thought that 9mm feed lips are supposed to be right around .355. If thats not the case all my cz mags are bad to.
-
The gun has between 2-3k rounds through it and i cleaned the extractor after it happened a week ago during practice.
Today on a stage the gun jammed up because it didnt extract the fired brass and tried to feed the next round. Dropped the mag and racked to slide to clear. I shot 6 more times to finish the stage and when i went to clear the gun i noticed it had done the same thing again but luckly on the last shot of the stage. I highly doubt the spring is bad and the extractor doesnt look damaged in any way. I attached a photo of the malfunction.
Any thoughts?
-
^^That's what I was thinking. Figured a 6-7 would be the about right. Although how much of the target does a 6moa dot fill at 25 yards?
-
What MOA Dot size are yall using?
-
IT didn't fit in my shadow holster. However my stock 2 holster works with both.
-
Multiple Firearm Purchases
in Miscellaneous BEginners
Posted
This is the first I've heard of this. My FFL tells me that I can buy or transfer as many gun at a time that I want to. I've done two pistols in one day and another two days later. I guess the FFL I use maybe does the paperwork and has no problem doing it or just doesn't know of this rule.