Jump to content
Brian Enos's Forums... Maku mozo!

Polymer

Classifieds
  • Posts

    614
  • Joined

  • Last visited

Posts posted by Polymer

  1. You removed material off the wrong area. Look at the post above this to see instructions and diagram. As stated on instructions, extremely sensitive on how much material is removed. Go super slow, minimal removed and recheck function. Remove like 1 to 2 thousandths and recheck.

     

    Also... Back out over travel screw in trigger all the way when fitting parts.

     

  2. Xtreme sear will fit normal sear cage. All sear cages will be the same except coating/polish. No need to get new one.

     

    Bolo fitting varies drastically among guns since tolerances and build quality vary so drastically on tanfo guns. Some guns don't even need fitting for bolo to work. The patriot defense r5 and r7 are very good also as alternatives.

  3. Xtreme has different finish, xtreme double action trigger installed with trigger work done.  I think that's it, I've never personally owned one. Regular model with trigger job will blow the xtreme away. S2 has cone barrel, hard chrome. S3 about quarter inch longer, about 3 oz heavier or so, all weight in the front, less durable finish. I'm sure there are other details I'm forgetting at the moment.

  4. Don't cut the magazine spring. You can up to a 10 lb spring if you think it's sluggish. Make sure slide rails and frame rails are smooth/polished/lapped. Make sure rib in center of slide that makes contact with ammo is polished and edge at breech face is chamfered. Make sure hammer face is polished.

  5. Sounds like you checked extractor tension, may want to try extra power extractor spring and or adjust extractor tension by filing on extractor nub. There's a thread on that. May need to trim a coil or so off if extra power extractor spring if it binds, some guns have shallow spring pocket. Check to see if sear cage is loose, some guns are notorious for that. I wouldn't cut the ejector...I believe the tip has to be at a specific angle or there will be erratic ejection. 

  6. Xtreme is waste of money. You can get cheaper and better trigger with regular tanfo guns after polishing and parts. The tanfo bible thread is a must read. S2 is more expensive because of popularity, hard chrome, and cone barrel. Only you can really decide which is best.....do you like nose heavy gun, lighter gun, cone barrel, longer radius, etc

×
×
  • Create New...