Gdub

Thanks guys

Thanks, So can you really tell the difference when running the two against each other?

whats the difference in the mag wells between CTS LS P and the SP01 Shadow? Anyone have any side by side pictures? Thanks,

Thanks

On a X-Calibur, can the mag release be reversed for a lefty like a CZ or Tanfo.? Thanks, Greg

I just started geting light primer strikes 2 weeks ago after about 1000 rounds. About 2 or 3 a match. I checked my FPB and it was failing as well. I was running a 4th gen Henning pin, LRA extended firing pin block, Titan hammer, EG Extreme light hammer spring, one piece sear,EG extreme light firing pin spring. I put the factory firing pin back in and the FPB is now working. I ordered a EG Extreme firing pin and will install it when it comes in. I'm going to the range this week to test it out.

Blade Tech DOH or Stingray for Tactical Sport, Comp-Tac International for CZ SP01 Cool. Thanks Stewart!

So what's the holster options for CTS LS-P if you were going to use it in production?

That's what I thought. Thanks

Can the mag release on a 938 be reversed for a lefty?

How big are the dots for this drill?

Thanks for all the input.

Question for all you A class and above shooters. I was thinking about purchasing 3 steel targets for practice. I was thinking about the targets that are basically the A and C zone size. My thought was it would speed up practice. My other thought was it would make me slopy. Do you A shooters and above use something like this for practice? If so how do you use your steel in practice and how often? Thanks,

Easy in and out for cleaning. I do think it lowered my DA trigger pull a tiny bit.

Great to hear! Thanks

I hope to find out what live ammo does today. It does look kind of scary though.

Anyone ever used one of these in their Tanfo Stock 2 or like guns? I bought one of their reduced power trigger return springs and picked this up at the same time. I can't find the post but I thought someone installed one of these in their Stock 2. The pin is quite a bit smaller than the hole but seems to stay in place during dry fire. It almost feels like it reduced my DA trigger pull a little. The pin not the spring, I already had the spring installed.

It shoots better than I do. It groups as good as any gun I've ever shot. I'm going to do some group shooting this week with some factory ammo this week just to make sure.

My newest Stock 2 has what seems like quite a bit of play between the slide and frame compared to my oldest one which has little to no play. Both guns seem equally accurate. 1. Should I be worried? 2. Will it get worse? 3. Is this hard to correct?

40's or 9's?

Why is it such a secret where people get these great deals on Stock II's? I've never seen a person on this forum anyway say hey I just picked up a Stock II 9 mm for $939.00 from XYZ gunshop. "It's always I only paid $939.00 a piece for my Stock II's." Then crickets. I know everyone says patience pays off but come on! I have my 2 Stock II's but it just seems like a giant secret.

DA 5 lbs. 12 oz. SA 2 lbs. 4 oz.

Being that the ejector is on the sear cage, maybe try taking the guts out of each sear cage and swap the sear cages between guns just to see it that's it. I don't know if the gun will feel and run like you want it to but if it ejects properly at least you know the ejector is the problem.

Anyone have a Stock II factory front sight and set screw that is gathering dust that they want to get rid of? I'm doing an experiment and need an extra or two. Thanks,

I used to use N320 for another shooting sport and loved it. I wish I could find some now. It is a bulky powder. I'd say if you have to go much past 3.2 gr with a 147 gr bullet loaded to that length you be getting pretty close to compressing the powder. I'm running in to that with Expansion Industry ETR7. It is the closest powder to N320 I have found so far. I tried loading 3.3 gr of ETR7 with a 147 gr RN FP loaded to 1.10" for my CZ since it has a short chamber and I'm pretty sure I was compressing the powder a little. They Chrono'd all over the board and the 5 shot average was a131 pf. I'm going to try 3.4 gr of ETR7 with the same bullet loaded out to 1.16" and see how it does. That round still seems to chamber in my S2's. By the way I'm using cast bullets with a mag Federal Primer. Also I can't help but hate you just a little. You have both a Stock II Extreme and VV N320. Both seem impossible to get right now. Post some pics of that Stock II Extreme. Good Luck