Mrguns
-
Posts
130 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Mrguns
-
-
how do i put a picture on here if if can ill put the diagram on and anyone who wants to can use it
-
p.s. i still have the diagrahm of the ejector if anyone wants it I would have to send it to you on an email because i dont know how to pics on here
parashooter38, i'm interested on your diagram since i'm also building an open gun from a para frame. I'll im you my email address. thx
-
is the registration gonna be on practiscore? thx
-
etm's work good on mine, also same mags my friend use for his 40 and & 45's no problem, no mods need on the mags.
-
A friend of mine got into a discussion regarding using a 40 comp on a 9mm barrel. I told him it might be unsafe to do so and might not even fit the barrel but since we don't have a 40 comp to even try to tread it (same tread pitch)on a 9mm barrel we can only speculate. Does anybody knows if this works before my smart (@#$) friend buys one and hurt him self just trying to prove me wrong. Thanks.
-
thx will try does two powders.
-
Just started shooting my Revo again (gp100 6 inch). Just wondering what powder mostly use for 38 spl and 357 magnum loads? Just for plinking. I normally use WST, WSF and TG for my pistol loads. Any info is appriciated. Thanks
-
Are these Ghost mag pouch Single stack legal? thanks
-
So far on my zev full trigger kit I only use federal primers, no light strikes, if I use different primers (so far I only use federal and winchester) I use the factory stricker spring, but I only shot less than 1000 k on my open glock since it is a back up. I will be doing a lot of testing this winter with it with different primers since federals are hard to come by here.
-
that's a beauty.
-
Jimmy Vidanes of 1911 Speed Shop in Riverside, CA.
yup
-
From USPSA website:
http://www.uspsa.org/document_library/rules/2014/Feb%202014%20Handgun%20Rules.pdf
•
Coned barrels, bull barrels, or barrels with flanges, except in 1911 compact pistols with a barrel length of 4.20 inches or less. (Note: All other barrels must have barrel bushings and conform to factory profile).
-
is 17 HMR a possibilty?
not for what she wanted to do, only 22 lr. I didn't know it's this hard looking for entry level rimfire rifle for lefty, most are in the $1200 plus area, so far she is getting 1/2 inch group at 15 yard and about an inch at 20 and 25 yards (standing and kneeling) using the ruger american rimfire with bulk ammo, but last week the rifle fell and somewhat chip the rear sight. Thinking of replacing it with williams peep sights.
-
do they make the cz 452 or 455 for left handed?
-
ernie hill/guga ribas. you can reconfigure it for the other guns as well.
-
I put one this year on my para p16-40, love it.
-
from ipsc website regarding Standard division rules
Standard Division1 Minimum power factor for Major 170 2 Minimum power factor for Minor 125 3 Minimum bullet weight No 4 Minimum bullet caliber / cartridge case length 9mm (0.354") / 19mm (0.748") 5 Minimum bullet caliber for Major 10mm (0.40"), see below 6 Minimum trigger pull (see Appendix E4) No 7 Maximum handgun size Yes, see below 8 Maximum magazine length Yes, see below 9 Maximum ammunition capacity No 10 Max. distance of handgun and allied equipment from torso 50mm (see Rule 5.2.5) 11 Rule 5.2.10 / Appendix E2 applies Yes 12 Optical/electronic sights No 13 Compensators, ports, sound and/or flash suppressors No, see belowSpecial conditions:
- A handgun in its ready condition (See Section 8.1), but unloaded and with an empty magazine inserted or empty cylinder closed, must fit wholly within the confines of a box which has internal dimensions of 225mm x 150mm x 45mm (tolerance of +1 mm, -0 mm). Note that all magazines must comply.
- The handgun is placed inside the box (and ultimately removed) by the competitor with the slide (or revolver barrel) parallel to the longest side of the box. Rear adjustable sights may be slightly depressed, but the slide must be fully forward, and all other features of the handgun, (e.g. collapsible and/or folding sights, slide rackers, thumb rests, grips etc.), must be fully extended or deployed when the gun is seated inside the box. Additionally, telescoping magazines and/or magazines with compressible base pads are expressly prohibited.
- Only porting of barrels is prohibited. Slides may be ported.
- 357SIG is also an approved caliber for Major, subject to achieving the applicable minimum power factor.This concession has been extended until 31 December 2017.
-
if dawson don't have their adjustable novak rear sight, try shooter's connection.
http://www.shootersconnectionstore.com/CK-Arms-Novak-Cut-Adjustable-Rear-Sight-P3896.aspx
-
yup looks like it is cut for burris ff or trijicon rmr (i think) or similar red dots sights.
-
Ameriglo and Trijicon both make suppressor height sights that basically rise straight up from the slide. I tried about four times to post a pic showing the Ameriglo and now want to fling this comfuser across the room
so I recommend a quick google search!sorry for hijacking the tread but will the suppressor hight front sights still fits the regular holsters? (blade tech and safariland 5198 holster). thanks
A difficult pic to get enough light and focus with an iPhone! This is a BladeTech. It looks like its been sanded on, but its just wear and tear since 2008ish. Hard to tell, but it clears by about an 1/8+/- of an inch...maybe a tad less...but definitely does not rub.
thx
-
Ameriglo and Trijicon both make suppressor height sights that basically rise straight up from the slide. I tried about four times to post a pic showing the Ameriglo and now want to fling this comfuser across the room
so I recommend a quick google search!sorry for hijacking the tread but will the suppressor hight front sights still fits the regular holsters? (blade tech and safariland 5198 holster). thanks
-
Same thing happen to me when I shot limited few months back on a level II match, an CRO stop me after giving the me the make ready command and wanted to bump to me open. I told him check with your MD to confirm legalities.
-
Just FYI, not sure if every body got this but it was emailed to me. No Coupon needed this is good until the end of Month I think all you have to do is type in "THANKYOU" on the coupon code and received the 30%.
-
found some local club that do collegiate style shooting and advice me to have a her use a bolt action, doesn't have to be single shot but have to load 1 at time on a magazine. I got her a ruger american rimfire will see how this goes.
so I recommend a quick google search!
Extended Ejectors for STI - Any experience
in Open Pistols
Posted
this is what parashooter38 emailed me, click on the pix to make it bigger