Jump to content
Brian Enos's Forums... Maku mozo!

bigdawgbeav

Classifieds
  • Posts

    1,063
  • Joined

  • Last visited

Posts posted by bigdawgbeav

  1. 1 hour ago, ParrytheWind said:

    You don't need to be afraid of a bagged firearm.

    You do when the shooter is shooting rimfire rifle, didn't check that his chamber was clear and forgot to flag (shooter and RO stupidity).  Then the shooter remembers it wasn't flagged after it was cased and tells the RO.  As they open the case to flag it they hit the trigger and send the unchecked round that was still in the chamber through the end of the case and into the berm.

  2. unfortunately there isn't much other than adding a buffer to try to smooth out the recoil of the Ruger.  What I can say is that it is a way different impulse than a traditional AR-style so it takes some getting used to.  I have run my in Steel Challenge with loads as low as 90PF (although the brass barely ejected).  I know in NY you are hamstrung on your accessories, but I'm using pretty much all Tandemkross parts including the chassis.  I had Wiland cut my barrel down and sleeve it, but Taccom makes a full barrel replacement as well.  

    2022-06-11 17.04.06.jpg

  3. On 4/15/2023 at 6:50 PM, xpierrat said:

    At Alabama State there was a cart where the muzzle's were pointing apox 6 to 7 feet in front of the cart so any time they pushed past people they were sweeping their lower legs... as a shooter ( and as a RO ) i would prefer all long guns in a case or scabbard they can still be carried in these carts just fine and then there is no discussion of taking them out at a berm and up or down.... the scabbards cost less than a box or two of 22 ammo  and are quick and simple to use.

     

    I agree with this statement.  I do see some folks that are still brining their carts up the the box.  It seems almost comical to me since the shooter had to go to a safe table and take their rifle out of a case.  At the end of the match then then have to go to a safe table and put it back in the case.  Why not just leave it in the case and bring that to the line.

     

    I could understand if it was a hard case and cumbersome.  Personally I'm using soft Tandemkross bags and I just hang them off the side of my cart.

    bag.jpg

  4. 3 hours ago, ZackJones said:

    Quick response as I'm about to head into a long work meeting. 

     

    Go to the classification look up page and click the link for Learn More About our Classification System. Item 6. 

    The process is pretty straight forward. If you want to request a downgrade for one or more divisions complete the form online. We will review and either approve or disapprove based on our review. Requesting a downgrade is voluntary. If you are happy being a 65%M class you can keep that classification if you want.

     

    I can explain more later but I have to run. 

     

    Jeez @ZackJones it's like your busy planning a Tier IV match or something...  

  5. 7 hours ago, WestPat said:

    Hello,

    Thank you for the kind words and encouragement.  I got on the waiting list, sent a short, polite email to Zach Jones, and this evening I got opened up to squad!  I’m shooting Squad 37 Thursday PM.  That will give me time to go check things out and see what’s up, and get a chance to use the Practice Bay.  If you have any tips on large match etiquette, I would appreciate it.  Is it okay to talk to the Super Squad after they finish all stages?

    Thanks again,

    David West

    First off: good luck at your first Worlds.  While it's a "World" competition, just do what you can do.  No need to act differently or change the way you compete.  Ultimately it's you against you. (that's why i DQ'd my first WSSC: did something different because i let my nerves get to me)

     

    Second: Stick with your squad, make sure you paint.  Unless you are the next shooter, on-deck or just got off the line.  Try not to wander during your session. Make sure to thank the ROs and staff.  They are out there working hard for you.

     

    Third:  The Super Squad shooters are normal folks just like everyone else there.  Most of them would be more than happy to talk to you, take pictures, etc.  I recommend waiting until you know they can talk.  The upper echelon shooters tend to have a pre-stage process starting when they are the on-deck shooter.  After they shoot might be a good time while they reload mags, or after that.  Kind of have to read the room.  Also before the session or after the session are usually good times as well. 

     

    Fourth:  HAVE FUN!  Go out there, do your best and have a great time.  Talk to lots of folks and enjoy. 

  6. Everyone has their favorites so its really hard to simply say "this is the best one".  What works for one may not work for another.  Personally I have switched over to Everglades ammo.  they are running sales all the time and I find their stuff really great.  Before that I had run PC Bullets (still one of the best poly-coated), Gallant, Brazos, and Precision.

  7. I used to shoot with a gentleman that didn't have the use of his right arm.  He would do everything with his left.  he'd insert the mag while it was still in the holster.  Than use the optic against the holster the rack the slide.  After the string he'd holster, eject mag and replace.  

  8. last year there were a number of slots still open once it started.  The nice thing about the WSSC is that it doesn't matter your shooter level.  It's the same 8 stages you might shoot at a local club.  If you have never shot SC before then I would look into one of the local matches.  Having the WSSC as the match to break your cherry is probably not the best.  However, there is nothing stopping you from shooting it.  There are no minimum requirements for classification.

  9. On 3/4/2023 at 9:39 PM, Thomas H said:

     

    Regarding the part in bold:  You literally are using the word "stepping" to describe what is happening here, and even better, said "stepping" is part of a multi-step movement.  Movement is indeed defined as taking more than 1 step---and your LAST two steps (the step into the box, and then bringing your other foot off the ground to also put it in the box) is literally the end of a series of steps.  (Which is definitely "more than one step.")

     

    "If a shooter starts moving their finger into the guard as they are making that last step into the box that is perfectly legal."

    No, that was literally a DQ, under the old rule.  No one would call it, though, which is why the rule needed to be fixed.

     

     

     

     

    First off, usually all of this happens so fast it's hard to watch it all unless it's blatant.  And yes I did say "stepping", referring to that last step into the center box.  Once that foot hits the ground inside the center box then they are no longer moving.  Doesn't matter about the other foot.  As long as it's not touching the ground.  So that is literally NOT a DQ.  Foot in box = no longer moving.  Foot about to hit the ground in the box = not MORE than one step, that A step.  Under the previous rule as long as their finger was outside the guard when they took MORE than one step it's fine.  

     

    The new rule clearly makes this discussion moot.

  10. 19 minutes ago, Thomas H said:

    Here's why:  Under the old rule, if a person started to bring their gun up and put their finger in the trigger guard while stepping into the box on Outer Limits, that was supposed to be a DQ.  (They have certainly taken more than one step, and are currently in movement.)  And yet, that's what almost everyone does---their finger is in the trigger guard when they are moving.  By the original rule, that's a flat-out DQ.

     

    If a shooter is stepping into the center box and putting their finger in the guard that isn't a DQ.  Once they are in the box they are no longer moving.  If it is a truly fast shooter they might not have the 2nd foot in, but as long as that isn't touching the ground they are "in the box".  Movement is defined as taking MORE than 1 step.  If a shooter starts moving their finger into the guard as they are making that last step into the box that is perfectly legal.

     

    This new rule just means that a shooter can move to the center box with their finger in the guard as long as they are aiming at the targets.  zzt makes a good point that even if the shooter is pointing the gun towards the targets if they look down they are no longer aiming.  

     

    Going back to my previous statement I, personally, will keep removing my finger.  I don't need to try and game the system and possibly slip, trip etc.  

  11. 15 hours ago, zzt said:

    I don't know J.  That seems to be what is meant, but it is silly.  Am I going to DQ a shooter because the muzzle dropped half way down the post while they were moving?  I don't think so.  For now, I'll tell my squad to keep them fully outside the trigger until there is more clarity on this.

     

    This sis what I don't get about USPSA/SCSA.  They had a perfectly clear, unambiguously enforceable rule and the mussy it up.  Same thing for USPSA.  Why are you DQing me?  I was aiming at a target.  No, you weren't.  A barrier is considered opaque and extends from ground up to infinity.   You know you are not allowed to shoot through it, so why do you think you can aim through it.  A couple of argument like that and now everyone keeps their finger out of the guard until the actually are aiming at a target.  I think the same will happen with those two rules.  Some DH will call a DQ, the MD will get involved, and there will be arguing.

    At least in SC there are no barriers leaving aiming a subjective call.  Personally I'll still take my finger out as that's the way I've always done it.  That's also why I voted the rule change was subjective.  Unfortunately match staff can't tell all shooters to keep finger out of trigger guard.  Well, they can say it, but can't enforce it if the shooter is moving and aiming at the targets.  So now not only is the RO looking at the feet and finger but now checking if the shooter is aiming at the next target.  It's going to take a new mindset when RO'ing OL.

     

    I get why they did it as this aligns more with USPSA where you can move as long as you are aiming at your next target.

  12. 8.3.8.2

    Original rule: Rimfire pistol –show clear and holster or case. (Trigger need not be pulled.)

    Updated rule: Rimfire pistol –show clear and holster or case. (Trigger need not be pulled.) RO may say "If clear, bag."

     

    8.3.8.3

    Original rule: Rimfire Rifle – show clear, flag, and case. (Trigger need not be pulled.) Note: The bolt must be closed on a chamber flag.

    Updated rule: Rimfire Rifle –show clear, flag, and case/muzzle up. (Trigger need not be pulled.) Note: The bolt must be closed on a chamber flag. RO may say "If clear, flag."

     

    8.5 and 8.5.1

    New section and rule: Movement, Except when the competitor is actually aiming or shooting at targets, all movement (see Appendix A3) must be accomplished with the fingers visibly outside the trigger guard.

    10.3.7

    Original rule: Moving (taking more than one step) with finger inside of trigger guard.

    Updated rule: Failure to keep the finger outside the trigger guard during movement in accordance with Section 8.5.

     

    8.5 and 10.3.7 are going to change how competitors move on Outer Limits and how ROs enforce.  If I'm reading this correctly shooters CAN keep their fingers inside the trigger guard as long as they are aiming at one of the targets moving from box to box.  If they lower the muzzle off of a target then they will have to have finger outside the trigger guard.  Am I reading that correctly?

  13. My Ruger has eaten everything I have thrown at it from factory ammo down to mouse-fart 95PF loads.  I currently have a cut-down and sleeved barrel to shave weight and love it for RFRI in Steel Challenge. 

     

    The only rounds it didn't like were the 125s from Precision Bullets.  They have a more rounded head and on ULSC the head would get caught on the rifling and I'd end up pulling the bullet and leaving it stuck in the chamber and power all in the receiver.  This may have been solved by loading a little shorter but I don't use them anymore anyway.

×
×
  • Create New...