[REDDING 9mm TITANIUM CARBIDE]

Has this ben replaced with the  Redding NxGen Carbide Sizing Die?

[FX-10]

1 hour ago, bigdawgbeav said:

here's another stupid question... only because I'm looking at getting one of these.  How tall does the setup end up being (from the bottom of the press to the tp of the case bowl)?  My current bench might be too high and I'm worried the case bowl will not fit under the rafters in the basement.

You need 54 inches between the top of your bench/mount to the ceiling to fully open the hopper lid

[USPSA mag extensions? 140mm]

I'm using TTI base pads and these fowlers and getting 25+1 in My M&P

https://csrgstore.us/products/csrg-multi-platform-competition-follower-spring-kit

[How Much Variance in Bullet Weight is Too Much?]

That amount would only matter if you were rifle bench rest shooter. Pistol no issues.

[FX-10]

Don't email you need to call them and if you don't want to wait on hold you can leave a call back number and they will get back to you. I broke my case pusher my fault called to ask where I could by they sent me 3 new ones for free.

[FX-10]

I also recommend these I had to shim 9MM and .223 shell plate up with one of each for .012" total thickness fixed a lot of the case pusher issues.

 

1	98055A513	1074-1095 Spring Steel Ring Shim, 0.2mm Thick, 70mm ID, Packs of 5	1 Pack	1	0	8.62 Per Pack	8.62
2	98089A513	18-8 Stainless Steel Round Shim, 0.1mm Thick, 70mm ID, Packs of 1

[FX-10]

I went from LNL to X-10 got it running smoothly a lot quicker than it took on LNL. I recommend checking every screw and bolt and make sure its tight.

[Case Gauging Results - Bulk Loading 9mm]

Those are some good results.

[My new M&P competitor]

I also have both and love them and really liking the Overwatch precision triggers on mine. I also have apex trigger but think the Overwatch have less take up.

[Is it even worth getting into reloading 9mm minor right now?]

2 hours ago, Dr. Phil said:

I wonder how much it will factor in to reloading if the "chat" is correct about our names and personal info will be reported upon buying ammo?

Seems it would be a very hard sell to track reloaded ammo from my basement.

https://www.regulations.gov/document/ATF-2023-0001-0001

[M&P Metal Competitor Brass Magwell and Brass Magazines Extensions?]

20 minutes ago, Drell said:

I had a Competitor and ran the Floyd’s brass magwell and the Freelance brass mag extensions. Everything ran good together. I ended up selling the M&P because I couldn’t good it to shoot a good group no matter what I tried.

How big was the group?

[Pulling coated bullets]

2 minutes ago, Youngeyes said:

I have the pile driver from Franklin. Love it. https://www.cabelas.com/shop/en/frankford-arsenal-pile-driver-bullet-puller?ds_e=GOOGLE&ds_c=Cabelas|Shopping|PMax|CatchAll|General|NAud|High|NMT&gad_source=1&gclid=Cj0KCQiAsburBhCIARIsAExmsu6Pebzxj98Y_9A9pMeExQb6zPTVbTcGPKAVZQkeNnDjcsPYb3UHc5UaAisnEALw_wcB&gclsrc=aw.ds

That's interesting never scene that one.

[Dot or Irons for EDC]

Run dot on all my pistols.

[leave on case lube after reloading, or get if off somehow]

I use one shot and leave it on.

[Tennis elbow?????]

I have both of these contraptions and they work but you have to use them regilarly.

 

 

 

 

 

[Smith and Wesson M&P2.0 metal]

20 hours ago, phil plesetz said:

I recently purchased a metal 2.0 Competitor. I have a Docter Optic, but the problem is the rear iron sight blocks access to the adjustment locking screws on the optic. 

I wanted to just remove the rear sight; however, it is also used to hold down the firing pin blocker pin/spring.

 

Does anyone make a dovetail with no sight for this application?  

 

Thanks,

The firing pin block is under the optic not the iron sight so you can remove with out issue. The firing pin block is only under irons on non optic ready models. 

[S&W M&P metal]

22 hours ago, usmc1974 said:

My smith and Wesson 2.0 metal feels better than any of my CZ guns It's awesome It's probably gonna pick up a competitor also

I have a metal and 2 competitor's love them. The competitor shoots a little flatter for me.

[S&W M&P metal]

On 11/11/2023 at 8:19 PM, 262alcante said:

I went from a CZ75B s/a ,to a S&W Metal I really like the Smith just waiting to try it out in a match.I see They make 23 rd mags ,do they work?

The 23 rd mags are over 140MM so not legal. S&W dropped the ball on that.

[Does anybody understand the holster space to hip regulations?]

2 hours ago, RangerTrace said:

The RHT dropped and offset is a no go according to our local AC or whatever his title is.  I've gone back to a race holster for USPSA, but for IDPA with a cover garment, I'm not sure it's worth the trouble to chase the holster advantage.

I tried my USPSA holster for the hell of it and it was hard to clear cover garment with that set up.

[Kore Competition Belt]

On 9/14/2023 at 12:59 AM, terrydoc said:

Only new I think, I got one of their Battle belts last year and an extra inner belt to use with my DAA Lynx with the ratchet. Had I seen this I would have jumped on it. 

How do you like the battle belt version? I need one for mutli gun and thinking about trying this.

[A 5" Prodigy Project]

If you don't mind me asking what have you spent on parts so far? I'm thinking about going this route.

[Commercial Rollsizer Pistol Disc Replacement Bolts]

Mcmaster Carr

[White River Energetics Primers]

Brass prices looked good till the shipping calculated $85 for shipping of 5000 rounds 9MM brass.

[From Staccato to S&W, looking for best competition platform for me, seeking sage advice]

It does shoot flatter than my 4-1/4 Metal.

[From Staccato to S&W, looking for best competition platform for me, seeking sage advice]

The competitor isn't ported just has slide cuts. The slide weights the same as my 4-1/4 Metal M&P