Claudio

What calibers are you pushing through?

Go to: http://www.brianenos.com/forums/index.php?...96&hl=sight

For IPSC go to: http://ipsc.invisionzone.com/index.php?showtopic=2140 It says it all.

Mine is about 1mm proud of the end of my barrel. If it really bugged you that much you can trim it and re-swage the end over. It should not be difficult if it is a Benelli part as it will be made of aluminium. But for the hassle factor I would just leave it

The spring on my Bomar that holds the up/down adjustment screw lost its tension. I contacted them and they sent me a whole new insert free of charge which I fitted. I live in South Africa. With service like that - I highly recommend them

I got myself a Lee factory crimp die and turned a rod that fits in my press. I took out all the insides of the die and when I get OP's brass I push it right through the die. Locally we dont get 40 brass that freely. BTW before you push it through you must lube it first, and I have found the best lube is the Dillon stuff.

Kurt There is only 1 screw holding down the front Hi-Viz sight. Have you had a problem with it coming loose and swinging around? Do you stay with the one light pipe for all conditions?

And do you change front sights throughout a match or stick to one?

Rather buy the LBT hardness tester. It is easier to use, more accurate and cheaper to boot.

This is how I modified my lifter in order to stop "Benelli thumb". I had to do no other mod's with regards the feeding, to the gun whats so ever. As I kept the angle that the lifter, lifts the same - I have had no feeding problems what so ever.

Oh - you mean that they already make an adjustable tube or do you mean that they make a long fixed length tube?

Why have you guys that shoot open class never developed a extendable magazine for your shotguns? It would require two pipes of different diameters, with one sliding into the other. Depending on the stage you could select the amount of rounds you want.

I lightened the carrier, and my Benelli runs 100% with it. I tried your modification of the lifter and still got my thumb stuck so I went the other way and lengthened it, which helped me. Greece: I hope to get there, it will depend on a few factors. I know a few guys locally are also speaking about going over.

Is it okay to use the 25% lighter recoil spring in the Benelli with the current IPSC shotgun factor?

IPSC limited - You cant have enough, but an absolute of 4